FUJI错误代码查询.pdf - 第457页

Display: I/O creation error Used by: CP3,GP551,GP6,QP242,QP201,QP202,QP203 Cause: An error occurred due to a lack of memory in the machine control software. This error occurred when Fuji OS system call_create_pia() which…

100%1 / 5282
Code: 12037003
Display: Memory allocation error
Used by:
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_test (_GET_GLOBAL) which secures memory of a specified size in the standard
memory was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037004
Display: RB UDT creation error
Used by:
Cause: In conjunction with the internal processing of the machine software, an attempt was made to
create a robust unit data table using the _create_robust_udt() system call of the Fuji operation system.
However, table creation was not successful because of insufficient memory.
Remedy: Reboot the machine using the reset-start procedure. If operation works properly after the reset-
start then wait in this status for several minutes. Consult Fuji if nothing changes even after a reset-start
is carried out or if the same type of symptoms occur frequently.
------------------------------
Code: 1203701?
Display: RB SRV creation error
Used by: GP551,GP6
Cause: In conjunction with the internal processing of the machine software, an attempt was made to
create a robust servo driver using the _create_robust_srv() system call of the Fuji operation system.
However, servo driver creation was not successful because of insufficient memory. The last digit in the
error code indicates the number of the axis for which creation was attempted.
Remedy: Reboot the machine using the reset-start procedure. If operation works properly after the reset-
start then wait in this status for several minutes. Consult Fuji if nothing changes even after a reset-start
is carried out or if the same type of symptoms occur frequently.
------------------------------
Code: 1203710?
Display: MX100 creation error
Used by: CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6
Cause: An error occurred during initialization of a board or in communication with a board. This error
occurred when Fuji OS system call_create_k300() which manages board initialization was used to generate
event control blocks (ICB) for the remote I/O and the OP link. The last number in the error code indicates
the number of the board in which the error occurred. 0 indicates the first board.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203711?
Display: MX100 creation error
Used by: CP4-1,CP4-2,CP4-3,CP5,CP642,CP643,GL541,GP551,GP6
Cause: An error occurred in the machine control software . This error occurred when Fuji OS system
call_create_k300() which generates event control blocks (ICB) for the remote I/O and the OP link was used.
The last number in the error code indicates the number of the board in which the error occurred. 0
indicates the first board.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203712?
第 456 页
Display: I/O creation error
Used by: CP3,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_pia() which generates event control blocks (ICB ) for VM-1520, VM-1540,
and ACTIVE_PIA was used. The last number in the error code indicates the number of the board in which
the error occurred. 0 indicates the first board.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037130
Display: I/O creation error
Used by:
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_in() which generates event control blocks (ICB) for sequential address
input such as LUC and TSA-150 was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037140
Display: I/O creation error
Used by:
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_system(_CREATE_ICB) which generates input control blocks (ICB) for digital
input was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037150
Display: Interrupt creation error
Used by:
Cause: An attempt was made to register an interrupt as an entry interrupt but the vector number was
over 181. The entry interrupt registration was made by Fuji OS system call_create_int().
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037160
Display: Interrupt creation error
Used by: CP4-1,CP4-2
Cause: An attempt was made to register in the CPU a certain interrupt as an event issuing interrupt but
the vector number was over 181. Registration of the event issuing interrupt was made by Fuji OS system
call_create_int().
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037200
Display: CPU CH1 creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's channel 1 serial port was used.
第 457 页
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037201
Display: CPU CH2 creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's channel 2 serial port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037202
Display: PIA PRN creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's parallel port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037203
Display: CPU board type error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: This CPU board type is not automatically generated. This error occurred when Fuji OS system
call_create_cpu_com() was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203721?
Display: ACIA creation error
Used by: CP5,CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when the MC6850 (ACIA)
driver was generated. This error occurred when Fuji OS system call_create_acia() was used. The last
number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203722?
Display: ACIA DBG creation error
Used by: CP642,GP6,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC6850 (ACIA). This error occurred when Fuji OS system call_create_acia_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203723?
第 458 页