FUJI错误代码查询.pdf - 第655页

being set using the I/O operation, the board information will be deleted if the reset-start operation is carried out thereby making it impossible to execute production. Remedy: First confirm whether or not the pallet ID …

Used by: QP132

Cause: There is no space in the internal table used for managing the board information of boards inside

the pallet. This is ordinarily an QP132 software bug.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 1206680D

Display: DATA LOGIC ERROR [1206680D]

Used by: QP132

Cause: There is a contradiction in the QP132 internal data between the pallet management table and the

board management table. A pallet indexing error will occur when either the pallet comes to a halt in the

incorrect position, or when erroneous data is reported by the PMC.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 1206680E

Display: DATA LOGIC ERROR [1206680E]

Used by: QP132

Cause: The PMC could not locate the program being used in production inside the machine. If the

program being used in production is not in the PMC, the PMC will send a request to the machine (main

controller). The QP132 specifications require that the program being used in production must be inside

the machine, therefore program deletion must not be carried out until the final board has been unloaded.

Remedy: Transmit the program.

------------------------------

Code: 1206680F

Display: DATA LOGIC ERROR [1206680F]

Used by: QP132

Cause: Multiple pallet ID number tables were detected in the pallet management table within the QP132

internal data. Either a pallet exists that actually has the same ID or there is a bug in the QP132 software.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. When replacing a damaged pallet, remove the ID plate from the

previous pallet and attach it to the new one. It will not be possible to proceed with operation unless the

error is cleared. If necessary restart normal operation after unloading all boards inside the machine using

the [Flush Out] command.

------------------------------

Code: 12066810

Display: DATA LOGIC ERROR [12066810]

Used by: QP132

Cause: The table for setting the amount of displacement for fiducial marks does not exist. On the

QP132, the board information is saved in the table when the board is loaded, and the pallet ID is saved at

the approach station after the board is loaded. As a result, when a board exists in the pallet loader after

第 654 页

being set using the I/O operation, the board information will be deleted if the reset-start operation is

carried out thereby making it impossible to execute production.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066811

Display: DATA LOGIC ERROR [12066811]

Used by: QP132

Cause: The board information table inside the pallet does not exist. On the QP132, the board

information is saved in the table when the board is loaded, and the pallet ID is saved at the approach

station after the board is loaded. As a result, when a board exists in the pallet loader after being set using

the I/O commands, the board information will be deleted if the reset-start operation is carried out thereby

making it impossible to execute production.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066812

Display: DATA LOGIC ERROR [12066812]

Used by: QP132

Cause: The creation of multiple board management tables in the QP132 internal data was detected. This

error occurs when separate pallets are found to have the same ID, or there is a QP132 software bug.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066813

Display: DATA LOGIC ERROR [12066813]

Used by: QP132

Cause: During operation in the "One board per pallet" mode a pallet with multiple boards was detected.

This is a bug in the QP132 software.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066814

Display: DATA LOGIC ERROR [12066814]

Used by: QP132

第 655 页

Cause: The pallet ID in the report received from the PMC is different from the previous pallet ID. The

pallet ID managed by the PMC is determined at the pallet stopping position and should not change until

the pallet moves during the next circulation. This error will occur if a PMC report mistake is detected, the

SS-axis is inched or if the pallet position is displaced by any circulation of pallets other than the

circulation associated with automatic operation.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066815

Display: DATA LOGIC ERROR [12066815]

Used by: QP132

Cause: This is a malfunction in the software. The buffer was filled without an inquiry being made by

communications packet processing.

Remedy: Cut the power to the machine and then turn it back on. There are also cases where it is

necessary to carry out the flush out operation.

------------------------------

Code: 12066816

Display: DATA LOGIC ERROR [12066816]

Used by: QP132

Cause: The X035: out-conveyor board arrival check sensor (OUT_ARRV_CHK) failed to work correctly. Or

there is a bug in the QP1 software.

Remedy: Carry out a check of the sensor.

------------------------------

Code: 12066817

Display: Same as code

Used by: QP132

Cause: Discontinue.

Remedy: Discontinue.

------------------------------

Code: 12066818

Display: Same as code

Used by: QP132

Cause: The machine has stopped operating because a processing or data inconsistency has been

detected.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

Read] command. Once the SS-axis has been returned to its origin position using the [SS Move] command,

ensure that the error has been cleared. It will not be possible to proceed with operation unless the error is

cleared. If necessary restart normal operation after unloading all boards inside the machine using the

[Flush Out] command.

------------------------------

Code: 12066819

Display: PLT size error [12066819]

Used by: QP132

Cause: Pallet size or pitch information outside specified limits has been detected.

Remedy: First confirm whether or not the pallet ID data has been incorrectly read. In the case where, for

example, an error occurs while indexing, return the pallet to the correct position and execute the [PID

第 656 页