FUJI错误代码查询.pdf - 第898页

Remedy: Reinstall the software, because the initial installation could have failed. ------------------------------ Code: 12200076 Display: Axis movement processing error. Used by: Cause: During axis movement, another pro…

100%1 / 5282
Code: 1220006e
Display: Abnormal servo amplifier error.
Used by:
Cause: A servo amplifier alarm occurred.
Remedy: Check the cause of the servo alarm and that the appropriate measurement has been made.
------------------------------
Code: 1220006f
Display: Abnormal encoder error.
Used by:
Cause: The encoder information between the amplifier and the servo controller is abnormal.
Remedy: Ensure that there are no breaks in the encoder wiring.
------------------------------
Code: 12200070
Display: 12V power loss.
Used by:
Cause: The 12V power supply for the servo control board was cut off.
Remedy: Check to ensure that the wire for the power supply is not broken or disconnected.
------------------------------
Code: 12200071
Display: Home signal detected.
Used by:
Cause: The home signal was detected and stop processing was performed.
Remedy: Check to ensure that the parameters in the servo initialization file are correct.
Make sure that the signal wire for the speed reduction sensor is not broken or disconnected.
------------------------------
Code: 12200072
Display: Amplifier parameter modified.
Used by:
Cause: An amplifier parameter has been changed.
Remedy: Reboot the machine in order to use the changed parameters.
------------------------------
Code: 12200073
Display: Servo controller error.
Used by:
Cause: An error has occurred in the processing performed for the servo controller board.
Remedy: The servo controller could be damaged.
Replace Servo controller with a new one if no abnormalities are found, because the servo controller
could be damaged.
------------------------------
Code: 12200074
Display: SERCOS communication error.
Used by:
Cause: An error has occurred during IDN SERCOS communication.
Remedy: Ensure that the digital operator is not connected to an amplifier.
Replace SERCOS drive with a new one if no abnormalities are found, because the SERCOS drive
could be damaged.
------------------------------
Code: 12200075
Display: Zero setting error.
Used by:
Cause: An invalid zero setting type is specified.
第 897 页
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12200076
Display: Axis movement processing error.
Used by:
Cause: During axis movement, another process occurred.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12200077
Display: Servo parameter error.
Used by:
Cause: Failed to set a parameter on the servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
Replace servo controller board with a new one if no abnormalities are found, because the servo
controller board could be damaged.
------------------------------
Code: 12200078
Display: Servo parameter error.
Used by:
Cause: Failed to acquire a servo parameter from the servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
Replace servo controller board with a new one if no abnormalities are found, because the servo
controller board could be damaged.
------------------------------
Code: 12200079
Display: Compare position registration error.
Used by:
Cause: The specified compare position object is not registered.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 1220007a
Display: SERCOS communication error.
Used by:
Cause: An error occurred during SERCOS communication.
Remedy: Ensure that the digital operator is not connected to an amplifier.
Replace SERCOS drive with a new one if no abnormalities are found, because the SERCOS drive
board could be damaged.
------------------------------
Code: 1220007b
Display: Machine type error.
Used by:
Cause: This function can only be called in a machine with an analog environment.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 1220007c
Display: Machine type error.
Used by:
Cause: This function can only be called in a machine with an SERCOS environment.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 1220007d
第 898 页
Display: Movement interpolation error.
Used by:
Cause: Movement interpolation has occurred for the same axis.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 1220007e
Display: Movement interpolation error.
Used by:
Cause: For the selected axes, movement interpolation cannot be be done because the axes are not on the
same servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 1220007f
Display: Process error.
Used by:
Cause: A function only supported by the RTX process was called.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12200080
Display: Process error.
Used by:
Cause: A function only supported by the Win32 process was called.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12200081
Display: Axes stop demand.
Used by:
Cause: The axis movement was stopped by the application.
Remedy: Remove the cause of the error and resume operation.
------------------------------
Code: 12200085
Display: Servo amplifier error.
Used by:
Cause: Positioning deviation pulse between motor encooder and linear encooder was over the set value.
Remedy: Check to ensure that the deviation setting is appropriate.
Check for breaks in the encoder wiring, or for bad connections.
------------------------------
Code: 12201001
Display: Command error.
Used by:
Cause: A command which can not be recognized was send to the conveyor control board.
Remedy: Replace conveyor control board with a new one if no abnormalities are found, because the
conveyor control board could be damaged.
------------------------------
Code: 12201002
Display: Data error.
Used by:
Cause: Incorrect data was send to the conveyor control board.
Remedy: Replace conveyor control board with a new one if no abnormalities are found, because the
conveyor control board could be damaged.
------------------------------
第 899 页