FUJI错误代码查询.pdf - 第2086页
Display: can't create level file Used by: Cause: The run level file could not be created. Remedy: Re-execute the function. If the error recurs, re-boot MCS. ------------------------------ Code: 2100EB8C Display: can…
Remedy: Re-install the software.
------------------------------
Code: 2100EB83
Display: can't open password file
Used by:
Cause: The password file could not be opened.
Remedy: Check the file.
------------------------------
Code: 2100EB84
Display: can't read in password file
Used by:
Cause: The password file header or offset table could not be read.
Remedy: Delete the file and re-create it.
------------------------------
Code: 2100EB85
Display: can't allocate data buffer
Used by:
Cause: Sufficient memory area could not be allocated for the password file.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB86
Display: can't read password file
Used by:
Cause: The password file could not be read.
Remedy: Check the file.
------------------------------
Code: 2100EB87
Display: can't open level file
Used by:
Cause: The run level file (R0/USER/level) could not be opened.
Remedy: Check the file.
------------------------------
Code: 2100EB88
Display: can't read level file
Used by:
Cause: The run level file (R0/USER/level) header or offset table could not be read.
Remedy: Delete the file and re-create it.
------------------------------
Code: 2100EB89
Display: can't allocate data buffer
Used by:
Cause: Sufficient memory area could not be allocated for the run level file.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB8A
Display: can't read level file
Used by:
Cause: The run level file could not be read.
Remedy: Check the file.
------------------------------
Code: 2100EB8B
第 2085 页
Display: can't create level file
Used by:
Cause: The run level file could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EB8C
Display: can't write level file
Used by:
Cause: Data could not be written to the run level file.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EB8E
Display: can't fork help task
Used by:
Cause: The help function could not be started up.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EC02
Display: path change error
Used by:
Cause: Due to a mistake in the terminal settings, the I/O path could not be changed.
Remedy: Reset the terminal settings.
------------------------------
Code: 2100EC03
Display: CRT event link error
Used by:
Cause: A terminal event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC04
Display: environment file can't open in hard disk
Used by:
Cause: The environment variable file on the hard disk could not be opened.
Remedy: Re-install the software.
------------------------------
Code: 2100EC05
Display: environment file can't open in RAM disk
Used by:
Cause: The environment variable file on the RAM disk could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC06
Display: file read error in hard disk
Used by:
Cause: An error occurred while accessing the hard disk.
Remedy: Re-boot MCS. If the error recurs, contact Fuji.
------------------------------
Code: 2100EC07
Display: file read error in RAM disk
Used by:
Cause: An error occurred while accessing the RAM disk.
第 2086 页
Remedy: Re-boot MCS. If the error recurs, contact Fuji.
------------------------------
Code: 2100EC08
Display: environment data not found
Used by:
Cause: The size of the environment variable buffers is not set in the edit_buffer_size item in the
environment variable file.
Remedy: Correct the environment variable file.
------------------------------
Code: 2100EC09
Display: task fork error
Used by:
Cause: Either Help or Err_dsp could not be started.
Remedy: Re-install the software.
------------------------------
Code: 2100EC0A
Display: Printer event link error
Used by:
Cause: An event link error occurred.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC0B
Display: Printer stop event set error
Used by:
Cause: A stop event set error occurred.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC0C
Display: can't open print pipe
Used by:
Cause: Print pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC0D
Display: can't open print count file
Used by:
Cause: The print counter file could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EC0E
Display: can't copy print file
Used by:
Cause: Print file couldn't be copied.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EC0F
Display: can't create temporary print file
Used by:
Cause: A temporary print file could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
第 2087 页