FUJI错误代码查询.pdf - 第757页

Display: "ICM(PMC?,SCU?) Error Code:********" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: This code (POSE_ABN) is an internal prossessing code which is reported with the…

100%1 / 5282
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?F5
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"SV boot check time-out" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: SV bootcheck timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?F6
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"SV comnd rspns time-out" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: SV command response timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?F7
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Abort w/SV comnd error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Command aborted due to SV command error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?F8
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Incorrect SV firmware size" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The SV firmware size is incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?FE
第 756 页
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: This code (POSE_ABN) is an internal prossessing code which is reported with the production data
report and indicates that the subject module or ICM is not the cause of the error which occued . ( 200V
on)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Clear the error.
------------------------------
Code: 12070?FF
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: This code (POSE_EMG) is an internal prossessing code which is reported with the production
data report and indicates that the subject module or ICM is not the cause of the error which occued . (
200V off)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Clear the error.
------------------------------
Code: 12070065
Display: The dipping load is out of range.
Used by: NP2, QP3
Cause: Dipping-Pressure has not been specified in part data, or the specified value is out of range.
Remedy: Specify the Dipping-Pressure in part data.
------------------------------
Code: 12070073
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Not CTL Memory Card" (QP2)
Used by: QP201,QP202
Cause: Firmware (memory card) is not for the CTL.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Use a CTL memory card.
------------------------------
Code: 12070074
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Not APL Memory Card" (QP2)
Used by: QP201,QP202
Cause: Firmware (memory card) is not for the APL.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Use an APL memory card.
------------------------------
Code: 12071?01
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Communication Command Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Command error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 757 页
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12071?02
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Module Number" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The module number is incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12071?20
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Command Transmission Failed" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: ARCNET driver error (transmission failure).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12071?21
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Receiving Buffer Overflow" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: ARCNET driver error (receive buffer overflow).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12071?3A
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Receiving Module Busy" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: ARCNET driver error (receiving module busy).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
第 758 页