FUJI错误代码查询.pdf - 第545页
Display: Cycle Alarm Chuck Used by: IP1,IP2 Cause: There was a nozzle chuck cylinder alarm. Remedy: Adjust the advanced and retracted positions of the nozzle chuck cylinder. ------------------------------ Code: 12054018 …
Used by: IP1,IP2,IP3
Cause: An alarm has occurred in a stick feeder or tape feeder cylinder system.
Remedy: Adjust the stick or tape feeder cylinder so that it is capable of moving forward and retracting.
------------------------------
Code: 1205400C
Display: PCM OUT Cylinder Time Out
Used by: CP5
Cause: The palette was not successfully unloaded from the out station to the down lifter.
Remedy: Check the PCM's out cylinder as well as the out cylinder's extended position.
------------------------------
Code: 12054010
Display: Cycle Alarm NOZZLE SHUTTER(IP)
Shutter(IP2)
Nozzle shutter error!(NP2,QP3)
Used by: IP1,IP2,NP2,QP3
Cause: There was a nozzle shutter cylinder alarm.
The nozzle shutter failed to open within the specified time (time-out error).(NP2,QP3)
Remedy: Adjust the advanced and retracted positions of the nozzle shutter cylinder.
Check the action of the nozzle shutter.(NP2,QP3)
------------------------------
Code: 12054012
Display: Cycle Alarm NOZZLE SHIFT
Used by: IP1,IP2
Cause: There was a nozzle shift cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the nozzle shift cylinder.
------------------------------
Code: 12054013
Display: Cycle Alarm Holder1
Used by: IP2
Cause: There was a holder 1 cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the nozzle shutter cylinder.
------------------------------
Code: 12054014
Display: Cycle Alarm Holder2
Used by: IP2
Cause: There was a holder 2 cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the holder 2 cylinder.
------------------------------
Code: 12054015
Display: Cycle Alarm Holder3
Used by: IP2
Cause: There was a holder 3 cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the holder 3 cylinder.
------------------------------
Code: 12054016
Display: Cycle Alarm Holder4
Used by: IP2
Cause: There was a holder 4 cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the holder 4 cylinder.
------------------------------
Code: 12054017
第 544 页
Display: Cycle Alarm Chuck
Used by: IP1,IP2
Cause: There was a nozzle chuck cylinder alarm.
Remedy: Adjust the advanced and retracted positions of the nozzle chuck cylinder.
------------------------------
Code: 12054018
Display: Cycle Alarm H2
Used by: IP2
Cause: A time up error has occured for the cylinder which moves the second holder to its ready position.
Remedy: Check the cylinder.
------------------------------
Code: 12054019
Display: Cycle Alarm H3
Used by: IP2
Cause: A time up error has occured for the cylinder which moves the third holder to its ready position.
Remedy: Check the cylinder.
------------------------------
Code: 1205401A
Display: Cycle Alarm ESC 2
Used by: IP2
Cause: A time up error has occured for the cylinder which moves the first holder to its retracted position.
Remedy: Check the cylinder.
------------------------------
Code: 1205401B
Display: Cycle Alarm ESC 3
Used by: IP2
Cause: A time up error has occured for the cylinder which moves the second holder to its retracted
position.
Remedy: Check the cylinder.
------------------------------
Code: 1205401D
Display: Cycle Alarm MFU1 Notch
Used by: IP2
Cause: The MFU1 fixed notch did not go in within the preset time.
Remedy: Check that the MFU1 fixed notch cylinder is operating properly.
------------------------------
Code: 1205401E
Display: Cycle Alarm MFU2 Notch
Used by: IP2
Cause: The MFU2 fixed notch did not go in within the preset time.
Remedy: Check that the MFU2 fixed notch cylinder is operating properly.
------------------------------
Code: 1205401F
Display: Cycle Alarm FRAME
Used by: GSP2,GSP3,GP2,GP3
Cause: The frame did not operate properly within the preset time.
Remedy: Check that there is no object interfering with the movement of the frame.
------------------------------
Code: 12054020
Display: 周期异常 电路板压板 L or R (GSP)
周期异常 汽缸 电路板压板(GP)
第 545 页
[Air Cylinder Cycle Alarm Push Plate]
Used by: GSP2,GSP3,GSP5,GP2,GP3,GP551,GP6,GPX,GPX-C
Cause: 电路板压板在时间内没有能够按指示动作。
Remedy: 请确认是否存在妨害电路板压板动作的东西。
<img src="$LKEY_ERRIMG_MC$/EI0010.bmp">
------------------------------
Code: 12054022
Display: Cycle Alarm Squeegee R
Used by: GSP2,GSP3,GP2,GP3
Cause: The right squeegee did not lower or raise itself in the preset time.
Remedy: Check that there is nothing interfering with the movement of the right squeegee.
------------------------------
Code: 12054023
Display: Cycle Alarm Squeegee L
Used by: GSP2,GSP3,GP2,GP3
Cause: the left squeegee did not lower or raise itself in the preset time.
Remedy: Check that there is nothing interfering with the movement of the left squeegee.
------------------------------
Code: 12054024
Display: "Cycle alarm: notch alarm" (GSP)
Used by: GSP2,GSP3,GP2,GP3
Cause: Notch insertion or removal is incomplete.
Remedy: Check notch insertion and removal, and adjust the following sensors:
IN2-31 L_PLT.NOTCH_OUT, IN2-30 R_PLT.NOTCH_OUT, IN3-13
R_PLT_.NOTCH_IN, and IN3-12 L_PLT.NOTCH_IN.
------------------------------
Code: 12054025
Display: "Cycle alarm: notch" (GSP)
Used by: GSP2,GSP3,GP2,GP3
Cause: Notch insertion or removal is incomplete.
Remedy: Check notch insertion and removal, and adjust the following sensors:
IN2-31 L_PLT.NOTCH_OUT, IN2-30 R_PLT.NOTCH_OUT, IN3-13
R_PLT_.NOTCH_IN, and IN3-12 L_PLT.NOTCH_IN.
------------------------------
Code: 12054026
Display: "Cycle alarm: SCR_F_Catch" (GSP)
Used by: GSP2,GSP3
Cause: The automatic screen replacement front screen catch could not be opened in the specified time.
Remedy: Make sure that nothing is obstructing the operation of the automatic screen replacement front
screen catch.
------------------------------
Code: 12054027
Display: "Cycle alarm: SCR_Guide" (GSP)
Used by: GSP2,GSP3
Cause: The automatic screen replacement rear screen guide could not be opened in the specified time.
Remedy: Make sure that nothing is obstructing the operation of the automatic screen replacement rear
screen guide .
------------------------------
Code: 12054028
Display: "Cycle alarm: SCR_Clamper" (GSP)
Used by: GSP2,GSP3
第 546 页