FUJI错误代码查询.pdf - 第2058页

------------------------------ Code: 2100C212 Display: IRQ Vector is busy Used by: Cause: A system error occurred. Remedy: Reset MCS. ------------------------------ Code: 2100C213 Display: Non-Existing Segment Used by: C…

100%1 / 5282
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C204
Display: The system's device table is full
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C205
Display: Bad Module ID
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C206
Display: The module directory is full
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C207
Display: Memory Full
Used by:
Cause: File management cannot save the memory.
Remedy: Reset MCS.
------------------------------
Code: 2100C208
Display: Unknown Service Code
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C209
Display: The module is busy
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C210
Display: Bad page address`
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C211
Display: The end of the file has been reached
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
第 2057 页
------------------------------
Code: 2100C212
Display: IRQ Vector is busy
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C213
Display: Non-Existing Segment
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C214
Display: File not accessible
Used by:
Cause: The Copy and Rewrite functions cannot run because the specified file is write protected.
Remedy: Select the write protect function and turn off the write production. Run the Copy function
again.
------------------------------
Code: 2100C215
Display: Invalid pathlist
Used by:
Cause: The method of specifying the pathlist is incorrect.
Remedy: Check the contents and partitions of the disk and file, and check the filename. Then, re-execute
the function.
------------------------------
Code: 2100C216
Display: File not found
Used by:
Cause: Either the specified file or the partition does not exist.
Remedy: Check the filename in the directory and input the filename again. If an error occurred while
performing a deletion, and the file exists in the file services file directory, execute the following command
from the UCI menu: ":/h0/cmds/del/ /h0/user/.bak/*".
------------------------------
Code: 2100C217
Display: File segment list is full
Used by:
Cause: The file is divided into too many segments and could not be written to.
Remedy: Delete unnecessary files, or perform maintenance on the hard disk.
------------------------------
Code: 2100C218
Display: File already exists
Used by:
Cause: A file with the same name as the specified file already exists.
Remedy: Change the specified filename or allow the previous file to be overwritten.
------------------------------
Code: 2100C219
Display: Illegal memory block specified.
Used by:
Cause: A system error occurred.
第 2058 页
Remedy: Reset MCS.
------------------------------
Code: 2100C221
Display: Module not found
Used by:
Cause: The specified process to be executed was not found.
Remedy: Check thin MCS/2 was completely installed properly. Use the program module test function for
the root of the problem.
------------------------------
Code: 2100C223
Display: Deleting stack memory
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C224
Display: Illegal process ID
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C225
Display: Bad IRQ parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C226
Display: No children
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C228
Display: The process has been aborted.
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C229
Display: Too many active processes
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C230
Display: Illegal Fork Parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2059 页