FUJI错误代码查询.pdf - 第284页

Display: 11D62??? The first number in ??? indicates the station number (in hexadecimal). The following two numbers indicate the device number in that station. For device numbers above 256, 256 is displayed. Used by: QP24…

ˇ The nozzle is of the index type.

ˇ An STU is attached.

In the above situation, parts being held by the nozzle may contact with parts in the tray.

Remedy: Check that the setting at the "Tray Pickup Offset Z" item in part data is set to +7.0 mm or less.

If this value is greater than 7.0 mm, production will not be possible at modules where the above

conditions are met, and the production program should be changed so that a different module is used.

------------------------------

Code: 11D50???

Display: 11D50???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by:

Cause: One of the following is the source of the error:

Pickup Offset X in part data for device number 1 is under -1 mm.

Pickup Offset X in part data for device number 23 is over + 1 mm.

Remedy: Because there is a limit on the X-axis stroke, set the offset to within this limit or for parts which

require a device offset, use device positions 2 to 22.

------------------------------

Code: 11D51???

Display: 11D51???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by:

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item

"D_ofst_x" value range is +-2.8mm. if the sixth bit is set to "1",the value is +

-5.0mm. For the CP652C,device 1 or 30 in a pallet in the transmitted program exceeds this range.

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Stat

------------------------------

Code: 11D60???

Display: 11D60???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by: QP242,QP201,QP202,QP203

Cause: The vision type required for vision processing is not specified.

Remedy: Specify correct data for 14. Vision_type in Part data's Vision_data.

------------------------------

Code: 11D61???

Display: 11D61???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by: CP652C

Cause: A nozzle specified in part data in the production program is not in the nozzle assignment table

(NAT).

Remedy: Edit the part data and NAT to ensure that the nozzle size is correct and then re-transmit the

program.

------------------------------

Code: 11D62???

第 283 页

Display: 11D62???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by: QP242,QP201,QP202,QP203,CP652C

Cause: (FLT, FIP3) During the device data check it was discovered that the machine does not have the

correct nozzle size to place one of the parts.

Remedy: (FLT, FIP3) Either install the required nozzle in the machine in order to place the part or change

17. Nozzle_size_max, 18. Nozzle_size_min, and 24. Nozzle name in part data's Carrying_data.

------------------------------

Code: 11D63???

Display: 11D63???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the device number in that station.

For device numbers above 256, 256 is displayed.

Used by: CP652C,QP132

Cause: The backlight diameter which is specified in header data is smaller than PD's smallest backlight

diameter.

Remedy: Input the correct backlight diameter and re-transmit the program.

------------------------------

Code: 11D64???

Display: Same as code The value replacing the first "?" is the station number; the values for the remaining

"??" indicate a device number within that station. These numbers appear as hexadecimal values. When a

device number greater than 256 is indicated, subtract 256 to find the device number.

Used by: QP242,QP201,QP202,QP203

Cause: The vision processing camera on the indicated QP242,QP201,QP202,QP203 station cannot

execute vision processing for the indicated device.

Remedy: Mount a camera capable of performing the necessary vision processing on the indicated

QP242,QP201,QP202,QP203 station. Also, set the appropriate data for this camera in the Camera Table

of the Part data.

------------------------------

Code: 11D65???

Display: Same as Code.

Used by: QP132

Cause: A nozzle related item in part data has not been set or the value that is set is not suitable.

The first "?" of the "???" represents the module number and the following "??" represent the device within

the module. The numbers are in hexadecimal format. If the device number is greater than 256, subtract

256.

Remedy: Set the following items:Nozzle_size_max, Nozzle_size_min, Nozzle_name.

------------------------------

Code: 11D66???

Display: Same as Code.

The first "?" represents the station number and the following "??" represent the device slot within the

station. Since the device slot number is represented in hexadecimal form, subtract 256 from any number

greater than 256.

Used by: QP242,QP201,QP202,QP203

Cause: Automatic selection of the BGA parts type camera cannot be made.

Remedy: Enter the camera selection manually.

------------------------------

Code: 11D67???

Display: Same as Code.

第 284 页

Used by: QP242,QP201,QP202,QP203

Cause: The part body sizes X and Y in part data are larger than the reject parts conveyor sizes.

The first "?" represents the station number and the following "??" represent the device slot within the

station. Since the device slot number is represented in hexadecimal form, subtract 256 from any number

greater than 256.

Remedy: Change body size X, or Y, to a size smaller than the reject parts conveyor size. Alternatively, set

a size for the reject parts conveyor in Proper data large enough to accommodate the size of the part.

------------------------------

Code: 11D68???

Display: Same as Code.

Used by: QP242,QP201,QP202,QP203

Cause: The size of the scan area for the line scan camera is too large.

The first "?" represents the station number and the following "??" represent the device slot within the

station. Since the device slot number is represented in hexadecimal form, subtract 256 from any number

greater than 256.

Remedy: Reduce the values specified at part data items, "scan_area_x" and "scan_area_y" as they

currently exceed the possible maximum scan area of the line scan camera. If "0" has been specified at

these items, vision processing according to the part's sizes cannot be performed.

------------------------------

Code: 11D69???

Display: Same as code.

Used by: QP242,QP201,QP202,QP203

Cause: Placing pressure control is being used during part pick-up at a module which is not equipped

with a placing pressure control sensor.

The first "?" represents the station number and the following "??" represent the device number within the

station. The numbering is hexadecimal. For device numbers higher than 256, subtract 256.

Remedy: Pressure control is used for the part assigned to this device when it is picked up. Change the

program so that the part is picked up at a module which is equipped with a placing pressure control

sensor.

------------------------------

Code: 11D6A???

Display: Same as code.

Used by: IP-3

Cause: The camera type specified in Proper data does not match the "Lighting" and "Fst_pin_chk"

settings in part data.

The first "?" indicates the stage number, the second two "??" indicate the slot number within the stage.

This is in hexadecimal notation. Subtract 256 for values larger than 256.

Remedy: Ensure the "Lighting" and "Fst_pin_chk" settings match those shown below:

Cameras other than type 12,13 Camera type 12,13

Back_light NON, IC, IC_FIRST, IC_180, NON, IC, IC_FIRST, IC_180,

CUT CUT

Front_light_A NON, IC, IC_FIRST, IC_180, NON, IC, IC_FIRST, IC_180,

CUT, BUMP CUT

Front_light_B *** NON, IC, IC_FIRST, IC_180,

CUT, MARK, BUMP

Front_light_AB *** NON, IC, IC_FIRST, IC_180

------------------------------

Code: 11D70???

Display: 11D70???

The first number in ??? indicates the station number (in hexadecimal).

The following two numbers indicate the nozzle number in that station.

第 285 页