FUJI错误代码查询.pdf - 第906页

------------------------------ Code: 12203015 Display: COM port error Used by: Cause: Failed to write to COM port. Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor- Sh…

100%1 / 5282
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300E
Display: Axis error
Used by:
Cause: The axis been already opened.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300F
Display: Axis error
Used by:
Cause: The axis is not still opened.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203010
Display: Axis error
Used by:
Cause: The axis is not still initialize.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203011
Display: DLL open error
Used by:
Cause: Failed to open DLL.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203012
Display: COM port error
Used by:
Cause: Failed to open COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203013
Display: COM port error
Used by:
Cause: Failed to initialize COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203014
Display: COM port error
Used by:
Cause: Failed to a setting of time-out interval of COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
第 905 页
------------------------------
Code: 12203015
Display: COM port error
Used by:
Cause: Failed to write to COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203016
Display: COM port error
Used by:
Cause: Failed to read from COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203017
Display: COM port error
Used by:
Cause: Failed to terminate COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203018
Display: Response code error
Used by:
Cause: The stepping motor controller has returned the code
which is not ACK or NAK.
Remedy: Replace stepping motor controller with a new one if this error is not corrected after reboot,
because the controller could be damaged.
------------------------------
Code: 12203019
Display: Response data error
Used by:
Cause: The stepping-motor-shell has not received data correctly.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301A
Display: Response error
Used by:
Cause: There is no response from the stepping motor controller.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301B
Display: Que error
Used by:
Cause: The number of que which stores a command became the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
第 906 页
Code: 1220301C
Display: Que error
Used by:
Cause: There is not a receiving data in the que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301D
Display: Que error
Used by:
Cause: Failed to clear que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301E
Display: Transmitting waiting state
Used by:
Cause: It is a transmitting waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 1220301F
Display: Receiving waiting state
Used by:
Cause: It is a receiving waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203020
Display: Que abort
Used by:
Cause: It had aborted before transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203021
Display: Que abort
Used by:
Cause: It had aborted during transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203022
第 907 页