FUJI错误代码查询.pdf - 第2214页

Code: 51??1243 Display: Cannot find the G mark file specification line. Used by: Cause: The G mark file specification line at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD&q…

100%1 / 5282
Cause: "UNIT", "MARK" for the B mark was not found in the specified production program or "UNIT",
"MARK" may not follow the correct unit. This report is made if the mark data and production program are
in the same file and the above error is detected. When downloading, the B mark data is set to its default
values.
Remedy: Check the setting for "UNIT", "MARK" in the production program. Furthermore, check the
setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1233
Display: No "UNIT", "MARK" for M mark or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: "UNIT", "MARK" for the M mark was not found in the specified production program or "UNIT",
"MARK" does not follow the correct unit. This report is made if the mark data and production program are
in the same file and the above error is detected. When downloading, the M mark data is set to its default
values.
Remedy: Check the setting for "UNIT", "MARK" in the production program. Furthermore, check the
setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1234
Display: No "UNIT", "MARK" for G mark or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: "UNIT", "MARK" for the G mark was not found in the specified production program or "UNIT",
"MARK" does not follow the correct unit. This report is made if the mark data and production program are
in the same file and the above error is detected. When downloading, the G mark data is set to its default
values.
Remedy: Check the setting for "UNIT", "MARK" in the production program. Furthermore check the setting
for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1240
Display: Cannot find F mark file specification line.
Used by:
Cause: The F mark file specification line at "GMKFN" in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in
the specified production program has been omitted. When downloading, the F mark data is set to its
default values.
Remedy: Check the "GMKFN" settings in the production program.
------------------------------
Code: 51??1241
Display: Cannot find the B mark file specification line.
Used by:
Cause: The B mark file specification line at "GMKBN" in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in
the specified production program has been omitted. When downloading, the B mark data is set to its
default values.
Remedy: Check the "GMKBN" settings in the production program.
------------------------------
Code: 51??1242
Display: Cannot find the M mark file specification line.
Used by:
Cause: The M mark file specification line at "GMKMN" in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in
the specified production program has been omitted. When downloading, the M mark data is set to its
default values.
Remedy: Check the "GMKMN" settings in the production program.
------------------------------
第 2213 页
Code: 51??1243
Display: Cannot find the G mark file specification line.
Used by:
Cause: The G mark file specification line at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in
the specified production program has been omitted. When downloading, the G mark data is set to its
default values.
Remedy: Check the "GMKGN" settings in the production program.
------------------------------
Code: 51??1244
Display: Multiple F mark file specification lines.
Used by:
Cause: There are multiple F mark file specification lines at "GMKFN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program. When downloading, the final line is taken to be the valid
one.
Remedy: Check the "GMKFN" settings in the production program.
------------------------------
Code: 51??1245
Display: Multiple B mark file specification lines.
Used by:
Cause: There are multiple B mark file specification lines at "GMKBN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program. When downloading, the final line is taken to be the valid
one.
Remedy: Check the "GMKBN" setting in the production program.
------------------------------
Code: 51??1246
Display: Multiple M mark file specification lines.
Used by:
Cause: There are multiple M mark file specification lines at "GMKMN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program. When downloading, the final line is taken to be the valid
one.
Remedy: Check the "GMKMN" setting in the production program.
------------------------------
Code: 51??1247
Display: Multiple G mark file specification lines.
Used by:
Cause: There are multiple G mark file specification lines at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program. When downloading, the final line is taken to be the valid
one.
Remedy: Check the "GMKGN" setting in the production program.
------------------------------
Code: 51??1248
Display: Setting omitted for F mark file name.
Used by:
Cause: At the "GMKFN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production
program, the F mark file name setting is "" or it has been omitted. When downloading, the F mark data is
set to its default values.
Remedy: Check the "GMKFN" setting in the production program.
------------------------------
Code: 51??1249
Display: Setting omitted for B mark file name.
Used by:
第 2214 页
Cause: At the "GMKBN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production
program, the B mark file name setting is "" or it has been omitted. When downloading, the B mark data is
set to its default values.
Remedy: Check the "GMKBN" setting in the production program.
------------------------------
Code: 51??1250
Display: Setting omitted for M mark file name.
Used by:
Cause: At the "GMKMN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production
program, the M mark file name setting is "" or it has been omitted. When downloading, the M mark data
is set to its default values.
Remedy: Check the "GMKMN" setting in the production program.
------------------------------
Code: 51??1251
Display: Setting omitted for G mark file name.
Used by:
Cause: At the "GMKGN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production
program, the G mark file name setting is "" or it has been omitted. When downloading, the G mark data is
set to its default values.
Remedy: Check the "GMKGN" setting in the production program.
------------------------------
Code: 51??1252
Display: Setting for F mark file name is too long.
Used by:
Cause: The F mark file setting which is entered at "GMKFN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKFN" setting in the production program.
------------------------------
Code: 51??1253
Display: Setting for B mark file name is too long.
Used by:
Cause: The B mark file setting which is entered at "GMKBN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKBN" setting in the production program.
------------------------------
Code: 51??1254
Display: Setting for M mark file name is too long.
Used by:
Cause: The M mark file setting which is entered at "GMKMN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKMN" setting in the production program.
------------------------------
Code: 51??1255
Display: Setting for G mark file name is too long.
Used by:
Cause: The G mark file setting which is entered at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
第 2215 页