FUJI错误代码查询.pdf - 第2078页

Cause: Data could not be written to the module test print file. Remedy: Re-execute the function. If the error recurs, re-boot MCS. ------------------------------ Code: 2100E528 Display: module test print out file open er…

Code: 2100E51F

Display: Memory full

Used by:

Cause: The memory is full.

Remedy: Re-boot MCS.

------------------------------

Code: 2100E520

Display: Directory open error

Used by:

Cause: The specified directory could not be opened.

Remedy: Re-install the software.

------------------------------

Code: 2100E521

Display: install list open error

Used by:

Cause: The install list could not be opened.

Remedy: Re-install the software.

------------------------------

Code: 2100E522

Display: install list file (temporary) open error

Used by:

Cause: The install list temporary file could not be opened.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E523

Display: install list file (temporary) read error

Used by:

Cause: The install list temporary file could not be read.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E524

Display: system command error

Used by:

Cause: Incorrect system command.

Remedy: Re-install the OS-9.

------------------------------

Code: 2100E525

Display: printer file create error

Used by:

Cause: The printer file could not be created.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E526

Display: module test print out file create error

Used by:

Cause: The module test print file could not be created.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E527

Display: module test print out file write error

Used by:

第 2077 页

Cause: Data could not be written to the module test print file.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E528

Display: module test print out file open error

Used by:

Cause: The module test print file could not be opened.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E529

Display: printer file write error

Used by:

Cause: Data could not be written to the print file.

Remedy: Re-execute the function. If the error recurs, re-boot MCS.

------------------------------

Code: 2100E52A

Display: device not ready

Used by:

Cause: The specified device (floppy disk drive or printer) is not in the operating status.

Remedy: Make sure that the floppy disk drive lock lever is fully closed and that the printer is turned on

and set on-line.

------------------------------

Code: 2100E52B

Display: device install list open error

Used by:

Cause: The install list for the specified device could not be opened.

Remedy: Re-install the software.

------------------------------

Code: 2100E52C

Display: Comm board and environment file setting mismatch.

Used by:

Cause: There are differences between the communication board data described in the environmental

constants and the installed communication board.

Remedy: Install the communication boards according to the procedure described in the environmental

constants. Or make the correct settings on the communication board.

------------------------------

Code: 2100E602

Display: not enough memory !

Used by:

Cause: Not possible to allocate sufficient memory area.

Remedy: Re-boot MCS.

------------------------------

Code: 2100E603

Display: command error

Used by:

Cause: An error occurred when a command was input.

Remedy: Re-execute the function. If the error recurs, re-install the software.

------------------------------

Code: 2100E604

Display:

Used by:

第 2078 页

Cause: A module could not be loaded. The module may have been destroyed.

Remedy: Re-install the software.

------------------------------

Code: 2100E605

Display: <****> not found

Used by:

Cause: The specified command does not exist.

Remedy: Correct the input command if this error occurred due to a direct command. Contact Fuji if the

error did not occur due to a direct command.

------------------------------

Code: 2100EA00

Display: parameter error

Used by:

Cause: The start-up parameters are incorrect.

Remedy: Contact Fuji.

------------------------------

Code: 2100EA01

Display: message file open error

Used by:

Cause: The string file could not be opened.

Remedy: Contact Fuji.

------------------------------

Code: 2100EA02

Display: File descriptor not found

Used by:

Cause: The file descriptor could not be loaded to memory.

Remedy: Re-install the software.

------------------------------

Code: 2100EA03

Display: Line descriptor load error

Used by:

Cause: The line descriptor could not be loaded to memory.

Remedy: Re-install the software.

------------------------------

Code: 2100EA04

Display: Error: can't create TTYS data

Used by:

Cause: The TTYS data file could not be created.

Remedy: Re-boot MCS. If the error recurs, re-install from the OS.

------------------------------

Code: 2100EA05

Display: Error: can't create Services data

Used by:

Cause: The Services data file could not be created.

Remedy: Re-boot MCS. If the error recurs, re-install from the OS.

------------------------------

Code: 2100EA06

Display: Error: can't create pipes data

Used by:

Cause: The Pipes data file could not be created.

Remedy: Re-boot MCS. If the error recurs, re-install from the OS.

第 2079 页