FUJI错误代码查询.pdf - 第2133页

Display: The mark check position (area)is outside the body. Used by: Cause: The mark check position (area)is outside the body. Remedy: Enter the correct mark check position (area)coordinates. ----------------------------…

Used by:

Cause: A part number with a Packaging Type of "Tray" is set for a Feeder stage number and slot number,

or, a part number with a Packaging Type other than "Tray" is set for a Tray stage number and slot

number.

Remedy: For Feeder stage numbers and slot numbers, specify a part number with a Packaging Type other

than "Tray". For Tray stage numbers and slot numbers, specify a part number with Packaging Type of

"Tray".

------------------------------

Code: 2300E401

Display: Fiducial Marks have not been set.

Used by:

Cause: There is no fiducial mark setting in the production program.

Remedy: Specify a fiducial mark setting at the Edit Mark screen.

------------------------------

Code: 2300E402

Display: Board skip marks have not been set.

Used by:

Cause: A board skip mark reading sequence exists, but there is no board skip mark setting.

Remedy: Specify a board skip mark setting at the Edit Mark screen.

------------------------------

Code: 2300E501

Display: The Polarity Setting item's [Not Use] setting is not supported.

Used by:

Cause: XP-series machines do not support Polarity Setting's "Not Use" setting.q宝xcept for program data

transmitted from MCS/2q搽Remedy: Set the Polarity Setting to another setting.

Remedy:

------------------------------

Code: 2300E502

Display: The Polarity Setting setting [Not Use] in the production program which was transmitted from the

MCS/2 to the XP-141E is not supported.

Used by:

Cause: MCS/2 programs used on XP-141E with the Polarity Setting set to "Not Use" cannot be used on

other machine types.

Remedy: Set the Polarity Setting to another setting.

------------------------------

Code: 2300E503

Display: The Polarity Setting setting [Not Use] in the production program which was transmitted from the

MCS/2 to the XP-241E/XP-341E is not supported.

Used by:

Cause: MCS/2 programs used on XP-241E and XP-341E with the Polarity Setting set to "Not Use" cannot

be used on other machine types.

Remedy: Set the Polarity Setting to another setting.

------------------------------

Code: 2300E540

Display: No suitable nozzle exists.

Used by:

Cause: The nozzle data contains neither the nozzle specified by the NozzleName item (in Part Type data),

or a nozzle which satisfies the NozzleSizeMin to NozzleSizeMax range setting.

Remedy: Specify the appropriate nozzle in the nozzle data.

------------------------------

Code: 2300E541

第 2132 页

Display: The mark check position (area)is outside the body.

Used by:

Cause: The mark check position (area)is outside the body.

Remedy: Enter the correct mark check position (area)coordinates.

------------------------------

Code: 2300E542

Display: Mark check area is improper.

Used by:

Cause: Mark check area is improper.

Remedy: Enter the correct mark check area coordinates.

This error occurs when the 'Upper Left X' and 'Lower Right X',or 'Upper Left Y' and 'Lower Right Y'

values are the same.

------------------------------

Code: 2300E543

Display: Mark check area is specified at the body center.

Used by:

Cause: Mark check area is specified at the body center.Unable to check the part supply orientation in the

case that the mark check area is specified at the body center.

Remedy: Check the specified coordinates and the area for mark checking.

------------------------------

Code: 2300E571

Display: ElementData is necessary when a Vision Type other than 10, or 18 is used.

Used by:

Cause: There is no ElementData although a Vision Type other than 10 or 18 is specified.

Remedy: Set the ElementData.

------------------------------

Code: 2300E572

Display: Set a value of 1 or above for [Lead Quantity] if the Vision Type is specified as 20, 100, 124, 130,

or 180.

Used by:

Cause: A "Lead Quantity" setting of "0" exists at the ElementData item of the Part Data, even though a

Vision Type of 20, 100, 124, 130, or 180 is specified.

Remedy: Specify a suitable "Lead Quantity" setting.

------------------------------

Code: 2300E573

Display: Set a value of 1 or above for [Lead Length] if the Vision Type is specified as 20, 100, 124, or 180.

Used by:

Cause: A "Lead Length" setting of "0" exists at the ElementData item of the Part Data, even though a

Vision Type of 20, 100, 124, or 180 is specified.

Remedy: Specify a suitable "Lead Length" setting.

------------------------------

Code: 2300E574

Display: Set a value of 1 or above for [Lead Width] if the Vision Type is specified as 20, 100, 124,130 or

180.

Used by:

Cause: A "Lead Width" setting of "0" exists at the ElementData item of the Part Data, even though a

Vision Type of 20, 100, 124,130 or 180 is specified.

Remedy: Specify a suitable "Lead Width" setting.

------------------------------

Code: 2300E575

Display: Vision Type 20 cannot be used for parts with 6 or more leads.

第 2133 页

Used by:

Cause: Vision Type 20 does not allow a "Lead Quantity" setting value of 6 or higher.

Remedy: Either change the Vision Type, or change the "Lead Quantity" setting to a value of 5 or less.

------------------------------

Code: 2300E576

Display: Lead Width is not defined.

Used by:

Cause: A "Lead Width" setting of "0" existed where the Result was other than 128 for the "Element" item

of a Vision Type 230 or 231 part.

Remedy: Specify "Lead Width" settings at lines where the Result is other than 128 for the "Element" item

of a Vision Type 230 or 231 part.

------------------------------

Code: 2300E577

Display: Lead Quantity is not defined.

Used by:

Cause: A "Lead Quantity" setting of "0" existed where the Result was other than 128 for the "Element"

item of a Vision Type 230 or 231 part.

Remedy: Specify "Lead Quantity" settings at lines where the Result is other than 128 for the "Element"

item of a Vision Type 230 or 231 part.

------------------------------

Code: 2300E578

Display: 128 cannot be set at the first line of Result.

Used by:

Cause: A setting of "128" exists at the first Result line for the Element item of a Vision Type 230 or 231

part.

Remedy: Specify a setting other "128" at the first Result line for the Element item of a Vision Type 230 or

231 part.

------------------------------

Code: 2300E579

Display: Result is set to 128 for 2 consecutive element lines.

Used by:

Cause: A setting of "128" exists at two consecutive Result lines for the Element item of a Vision Type 230

or 231 part.

Remedy: Do not specify a "128" setting at two consecutive Result lines for the Element item of a Vision

Type 230 or 231 part.

------------------------------

Code: 2300E57A

Display: When using Vision Type 230 or 231, set the P Pattern to 1 or 2.

Used by:

Cause: For Vision Types 230 and 231, vision processing is only possible when the "P Pattern" is set to 1

or 2.

Remedy: For Vision Types 230 and 231, set the "P Pattern" to 1 or 2.

------------------------------

Code: 2300E57B

Display: 2 Element lines are required for Vision Type 20.

Used by:

Cause: For Vision Type 20, vision processing is only possible when the "Element" setting occupies 2 or

more lines.

Remedy: Specify 2 lines for the "Element" setting. If the Element sides are not facing each other, change

the Vision Type.

------------------------------

第 2134 页