FUJI错误代码查询.pdf - 第673页

Cause: Remedy: ------------------------------ Code: 12068480 Display: TZ-axis: Overload warning. Used by: QP3,NP2 Cause: Servo amp error. Remedy: Reset the servo amp. ------------------------------ Code: 12068481 Display…

100%1 / 5282
Display: TZ-axis: File type change error!
Used by: QP3,NP2
Cause:
Remedy:
------------------------------
Code: 12068436
Display: TZ-axis: Filter constant change error!
Used by: QP3,NP2
Cause:
Remedy:
------------------------------
Code: 12068437
Display: TZ-axis: Origin specification error!
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Specify the origin.
------------------------------
Code: 12068438
Display: TZ-axis: It is not possible to specify the origin when the axis is moving.
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Specify the origin after axis movement has been completed or check the range for the
completion of servo amp positioning.
------------------------------
Code: 12068439
Display: TZ-axis: User constant setting error.
Used by: QP3,NP2
Cause:
Remedy:
------------------------------
Code: 1206843A
Display: TZ-axis: MECHATROLINK servo synchronization error.
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Check the wiring between the controller amps and check for servo amp errors.
------------------------------
Code: 1206843B
Display: TZ-axis: MECHATROLINK communication error.
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Check the wiring between the controller amps and check for servo amp errors.
------------------------------
Code: 1206843C
Display: TZ-axis: MECHATROLINK servo command time-out error.
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Check the wiring between the controller amps and check for servo amp errors.
------------------------------
Code: 1206843D
Display: TZ-axis: Absolute encoder rotation limit error.
Used by: QP3,NP2
第 672 页
Cause:
Remedy:
------------------------------
Code: 12068480
Display: TZ-axis: Overload warning.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068481
Display: TZ-axis: Regeneration overload warning.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068482
Display: TZ-axis: User constant setting warning.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068483
Display: TZ-axis: MECHATROLINK command warning.
Used by: QP3,NP2
Cause:
Remedy: Check if the digital operator is still connected to a servo amplifier.
------------------------------
Code: 12068484
Display: TZ-axis: MECHATROLINK communication error warning.
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK communications cable between the MTU controller and servo
amplifier is connected correctly.
------------------------------
Code: 12068485
Display: TZ-axis: User constant corruption error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068486
Display: TZ-axis: Main circuit detection error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068487
Display: TZ-axis: A parameter setting error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
第 673 页
------------------------------
Code: 12068488
Display: TZ-axis: Motor/servo capacity mismatch.
Used by: QP3,NP2
Cause:
Remedy: Check that the motor and servo amplifier are connected correctly.
------------------------------
Code: 12068489
Display: TZ-axis: Overcurrent error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848A
Display: TZ-axis: Regeneration error!
Used by: QP3,NP2
Cause:
Remedy: Check that the regenerative resistance wiring is connected to the servo amplifier.
------------------------------
Code: 1206848B
Display: TZ-axis: Regeneration overload.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848C
Display: TZ-axis: Overvoltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848D
Display: TZ-axis: Insufficient voltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848E
Display: TZ-axis: Excess travel speed error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848F
Display: TZ-axis: Overload peak error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068490
Display: TZ-axis: Structural overload error!
第 674 页