FUJI错误代码查询.pdf - 第2227页

mark was not found. This report is made when the mark data and production program are in the same file, the G mark data is required in the applicable machine type and the above error is detected. When downloading, the G …

100%1 / 5282
Code: 51??1358
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the M mark data file.
Used by:
Cause: The M mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the M mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the M mark data file which is
referred to in the production program.
------------------------------
Code: 51??1359
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the G mark data file.
Used by:
Cause: The G mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the G mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the G mark data file which is
referred to in the production program.
------------------------------
Code: 51??1400
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in F mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in F
mark was not found. This report is made when the mark data and production program are in the same
file, the F mark data is required in the applicable machine type and the above error is detected. When
downloading, the F mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1401
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in B mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in B
mark was not found. This report is made when the mark data and production program are in the same
file, the B mark data is required in the applicable machine type and the above error is detected. When
downloading, the B mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1402
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in M mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in M
mark was not found. This report is made when the mark data and production program are in the same
file, the M mark data is required in the applicable machine type and the above error is detected. When
downloading, the M mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1403
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in G mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in G
第 2226 页
mark was not found. This report is made when the mark data and production program are in the same
file, the G mark data is required in the applicable machine type and the above error is detected. When
downloading, the G mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1404
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for F mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the F
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the F mark is not multiply defined.
------------------------------
Code: 51??1405
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for B mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the B
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the B mark is not multiply defined.
------------------------------
Code: 51??1406
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for M mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the M
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the M mark is not multiply defined.
------------------------------
Code: 51??1407
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for G mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the G
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the G mark is not multiply defined.
------------------------------
Code: 51??1408
Display: Format error in F mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
F mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
第 2227 页
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1409
Display: Format error in B mark's "UNIT", "MARK" - "BLOCK" MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
B mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1410
Display: Format error in M mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
M mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1411
Display: Format error in G mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
G mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 51??1500
Display: No nozzle data file.
Used by:
Cause: The nozzle data file referred to in the specified production program was not found. This report is
made when the nozzle data and the production program are in different files, the nozzle data being
referred to is required in the applicable machine type and the above error is detected.
Remedy: Check the setting for "GNAN" in "BLOCK", "PGHEAD" in the production program. Furthermore,
check that the file is in the nozzle data directory.
------------------------------
Code: 51??1501
Display: Nozzle data file in use.
Used by:
Cause: The nozzle data file referred to in the specified production program is being used. This report is
made when the nozzle data and the production program are in different files, the nozzle data being
referred to is required in the applicable machine type and the above error is detected.
Remedy: Wait until the file is not being used and then re-execute.
------------------------------
Code: 51??1502
Display: No authorization for nozzle data file.
Used by:
Cause: There is no access authorization for the nozzle data file which is referred to in the specified
production program. This report is made when the nozzle data and the production program are in
different files, the nozzle data being referred to is required in the applicable machine type and the above
error is detected.
Remedy:
第 2228 页