FUJI错误代码查询.pdf - 第304页
Cause: The receiver (ARCNET) for unit 0 was busy and therefore transmission could not be performed. Remedy: Ensure that the receiver's line is accessible. Turn off the Machine power. ------------------------------ C…
Display: PPC : Zero tracking...
Used by: IP3
Cause: The PPC is operating in zero tracking mode.
Remedy: Set the PPC not to operate in zero tracking mode.
------------------------------
Code: 12020706
Display: PPC : Status reading error
Used by: IP3
Cause: An error occurred when reading the PPC status report.
Remedy: Check the PPC, the PPC communication cable and the 6 channel communication board.
------------------------------
Code: 12020707
Display: PPC : Measured value reading error
Used by: IP3
Cause: An error occurred when reading the PPC measurement value.
Remedy: Check the PPC, the PPC communication cable and the 6 channel communication board.
------------------------------
Code: 12020800
Display: Glue test unit cover is open.
Used by: QP3
Cause: The cover of the glue test unit is open.
Remedy: Close the cover and resume production.
------------------------------
Code: 12020801
Display: Glue test unit start up error.
Used by: QP3
Cause: The supply button is in the pushed state, or the glue test unit is not set correctly.
Remedy: Check the supply button on the glue test unit. Check the position, power supply connection,
and air connection of the glue test unit.
------------------------------
Code: 12020802
Display: Glue test unit connection error.
Used by: QP3
Cause: The glue test unit is not set correctly.
Remedy: Check the position, power supply connection, and air connection of the glue test unit.
------------------------------
Code: 12020803
Display: Glue test unit paper out.
Used by: QP3
Cause: The paper for the glue test unit has run out.
Remedy: Push the supply button and remove the used paper. Set new paper in the unit.
------------------------------
Code: 12020804
Display: Glue test unit movement error.
Used by: QP3
Cause: The changing of the paper was not completed correctly.
Remedy: Remove the jammed paper or other items causing the error and reset.
------------------------------
Code: 12031?3A
Display: 12031?3A
Used by: QP242,QP201,QP202,QP203
第 303 页
Cause: The receiver (ARCNET) for unit 0 was busy and therefore transmission could not be performed.
Remedy: Ensure that the receiver's line is accessible. Turn off the Machine power.
------------------------------
Code: 12031000
Display:
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643,QP242,QP201,QP202,QP203
Cause: Unit number 0 (ACIA) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031001
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (ACIA) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031002
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (ACIA) reception buffer full.
Remedy: Turn off the machine power.
------------------------------
Code: 12031003
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (ACIA) memory save error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031010
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (COM78808) reception buffer full.
Remedy: Turn off the machine power.
------------------------------
Code: 12031011
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (COM78808) memory save error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031012
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (COM78808) framing error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031013
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (COM78808) over-run error.
Remedy: Turn off the machine power.
------------------------------
第 304 页
Code: 12031014
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (COM78808) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031020
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET) transmission error. The companion ID did not exist.
Remedy: Turn off the machine power.
------------------------------
Code: 12031021
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET) reception buffer overflow (the MCB data area size set at OS
was exceeded).
Remedy: Turn off the machine power.
------------------------------
Code: 12031022
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET). Partitioning processing was prohibited, so data partitioning
could not be carried out.
Remedy: Turn off the machine power.
------------------------------
Code: 12031023
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET) buffer overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12031024
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET) IP header check sum error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031025
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET). IP header sub-heading is incorrect (the partitioned IP packet
sub-headings are not the same).
Remedy: Turn off the machine power.
------------------------------
Code: 12031026
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number 0 (UDP/IP/ARCNET). Creation time was insufficient so the packet was discarded.
Remedy: Turn off the machine power.
------------------------------
第 305 页