FUJI错误代码查询.pdf - 第2129页

------------------------------ Code: 2300E116 Display: The mark name is not specified. Used by: Cause: The mark name field in the mark sequence is blank. Remedy: Specify the mark name to match the existing mark data. ---…

stage and slot number.

Used by:

Cause: Sequence data with and without feeder skip settings exist for the same stage/slot number.

Remedy: Correct the sequence data so that all sequences for the same stage/slot number have the same

feeder skip settings.

------------------------------

Code: 2300E110

Display: The total number of board skip mark read sequences and fiducial mark read sequences exceeds

255.

Used by:

Cause: The total number of board skip mark read sequences and fiducial mark read sequences exceeds

255.

Remedy: Correct the sequence data so that the total number of board skip mark read sequences

(Sequence type:B) and fiducial mark read sequences (Sequence type:F) is 255 or less.

------------------------------

Code: 2300E111

Display: The "Sequence Comment" sequence specified for the "Place Before" sequence does not exist on the

same board.

Used by:

Cause: The "Sequence Comment" sequence specified for the "Place Before" sequence does not exist on the

same board.

Remedy: Specify a "Sequence Comment" sequence that applies to the same board as that of the "Place

Before" sequence.

The "Place Before" sequence is ignored where the "Sequence Comment" sequence does not apply to the

same board.

------------------------------

Code: 2300E112

Display: The same name has been allocated to "Place Before" and "Sequence Comment".

Used by:

Cause: The same name has been allocated to the "Place Before" and "Sequence Comment" sequences.

Remedy: Specify different names for the "Place Before" and "Sequence Comment" sequences.

------------------------------

Code: 2300E113

Display: Duplicate "Sequence Comment" sequences exist for the same board.

Used by:

Cause: Duplicate "Sequence Comment" sequences exist for the same board.

Remedy: Create sequences so that "Sequence Comment" sequences are not duplicated for the same

board.

------------------------------

Code: 2300E114

Display: The "Place Before" sequence order is incorrect.

Used by:

Cause: The "Place Before" sequence order is incorrect.

Remedy: Change the "Place Before" sequence order so that the "Place Before" sequence is positioned

before the "Sequence Comment" sequence.

------------------------------

Code: 2300E115

Display: Mark data does not exist for the specified mark name.

Used by:

Cause: Either the mark name is input incorrectly in the sequence data, or the mark data does not exist.

Remedy: Check the mark data. If mark data does exist, then check the mark name in the sequence data.

第 2128 页

------------------------------

Code: 2300E116

Display: The mark name is not specified.

Used by:

Cause: The mark name field in the mark sequence is blank.

Remedy: Specify the mark name to match the existing mark data.

------------------------------

Code: 2300E117

Display: The mark name is not specified. The No. 1 mark from the mark edit screen is being used.

Used by:

Cause: A mark name has not been specified in the sequence editor screen. The No. 1, type F mark from

the mark editor screen is being used.

Remedy: If there is a problem with the mark being used, then specify a different mark name in the

sequence edit screen.

------------------------------

Code: 2300E118

Display: The global skip mark sequence must be positioned earlier in the program than the board skip

mark sequence.

Used by:

Cause: The global skip mark sequence must be positioned earlier in the program than the board skip

mark sequence.

Remedy: Input the global skip mark sequence at an earlier sequence no. than the board skip mark

sequence.

------------------------------

Code: 2300E119

Display: When referencing fiducial marks for global / board skip mark sequences, the board no. for the

fiducial mark sequence must be 0.

Used by:

Cause: When referencing fiducial marks for global / board skip mark sequences, the board no. for the

fiducial mark sequence must be 0.

Remedy: Set the board no. for a fiducial mark sequence to 0 when referencing fiducial marks for global /

board skip mark sequences.

------------------------------

Code: 2300E11A

Display: The fiducial mark sequence must be positioned earlier in the program than the global / board

skip mark sequence.

Used by:

Cause: The fiducial mark sequence must be positioned earlier in the program than the global / board

skip mark sequence.

Remedy: Input the fiducial mark sequence at an earlier sequence no. than the global / board skip mark

sequence.

------------------------------

Code: 2300E11B

Display: A board skip mark sequence for a particular board no. must be positioned earlier in the program

than any placement sequences for that board.

Used by:

Cause: A board skip mark sequence for a particular board no. must be positioned earlier in the program

than any placement sequences for that board.

Remedy: Input the board skip mark sequence for a particular board no. at an earlier sequence no. than

any placement sequences for that board.

------------------------------

第 2129 页

Code: 2300E11C

Display: The main and sub marks are too close together.

Used by:

Cause: Unable to correct placement because the main and sub marks are too close together.

Remedy: Revise the mark settings or to separate the main and sub marks by at least 5 mm.

------------------------------

Code: 2300E11D

Display: Another group skip mark sequence has the same mark number.

Used by:

Cause: Another group skip mark sequence has the same mark number.

Remedy: Change the mark number.

------------------------------

Code: 2300E11E

Display: There is a group skip mark sequence after a board skip mark sequence.

Used by:

Cause: The insertion order is incorrect.There is a group skip mark sequence after a board skip mark

sequence.

Remedy: Change the insert order so that group skip mark sequences are before board skip mark

sequences.

------------------------------

Code: 2300E11F

Display: There is a global skip mark sequence after a group skip or board skip mark sequence.

Used by:

Cause: The insertion order is incorrect.There is a global skip mark sequence after a group skip or board

skip mark sequence.

Remedy: Change the insert order so that global skip sequences are before group skip mark sequences and

board skip mark sequences.

------------------------------

Code: 2300E120

Display: To reference a fiducial mark,a fiducial mark whose board number 0 is required.

Used by:

Cause: When referencing a fiducial mark for a global skip mark,group skip mark,or board skip mark,a

fiducial mark whose board number is 0 is required.

Remedy: Create a fiducial mark sequence whose board number is 0.

------------------------------

Code: 2300E121

Display: The reference fiducial mark is after the current sequence.

Used by:

Cause: The insertion order is incorrect.The reference fiducial mark is after the current sequence.

Remedy: Change the insert order so that the reference fiducial mark is before the indicated sequence.

------------------------------

Code: 2300E201

Display: The Program polarity item's [No] setting is not supported.

Used by:

Cause: XP-series machines do not support Program Polarity's "No" setting.q宝xcept for program data

transmitted from MCS/2q搽Remedy: Set the Program Polarity setting to "Yes".

Remedy: Set the Program Polarity setting to "Yes".

------------------------------

Code: 2300E202

Display: The Program Polarity setting [No] in the production program which was transmitted from the

MCS/2 to the XP-141E is not supported.

第 2130 页