FUJI错误代码查询.pdf - 第2115页

------------------------------ Code: 2100FF0D Display: check flag rewrite error Used by: Cause: The check flag could not be rewritten. Remedy: Check that the file overwrite protector is not set to prevent overwriting. --…

100%1 / 5282
Used by:
Cause: The specified file does not exist.
Remedy: Specify the correct filename.
------------------------------
Code: 2100FF05
Display: can't create output file
Used by:
Cause: The output file could not be created.
Remedy: Check the RAM for previously created files and for remaining memory. Re-boot MCS.
------------------------------
Code: 2100FF06
Display: can't create print file
Used by:
Cause: The print file could not be created.
Remedy: Check the RAM for previously created files and for remaining memory. Re-boot MCS.
------------------------------
Code: 2100FF07
Display: change console path error
Used by:
Cause: During operation, the specified terminal path could not be changed.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100FF08
Display: CRT event link error
Used by:
Cause: The terminal could not be event linked.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100FF09
Display: can't load status file on memory
Used by:
Cause: The specified status file could not be loaded into memory.
Remedy: Re-boot MCS.
------------------------------
Code: 2100FF0A
Display: can't load file descriptor on memory
Used by:
Cause: The file descriptor cannot be loaded into memory.
Remedy: Re-boot MCS. If the error recurs, re-install the system.
------------------------------
Code: 2100FF0B
Display: check file is not a status data file
Used by:
Cause: The specified file is not a status file.
Remedy: Specify a status file.
------------------------------
Code: 2100FF0C
Display: can't open Lp pipe
Used by:
Cause: The Lp pipe cannot be opened.
Remedy: Re-boot MCS.
第 2114 页
------------------------------
Code: 2100FF0D
Display: check flag rewrite error
Used by:
Cause: The check flag could not be rewritten.
Remedy: Check that the file overwrite protector is not set to prevent overwriting.
------------------------------
Code: 2100FF0E
Display: Status data no. **** over
Used by:
Cause: The **** status data item is out of range.
Remedy: Correct the item.
------------------------------
Code: 2100FF0F
Display: '+' option not found
Used by:
Cause: The '+' option could not be found at start-up.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF10
Display: check flag data read error
Used by:
Cause: The check flag could not be read.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF11
Display: On_line production report is not supported
Used by:
Cause: The on-line function is not currently supported.
Remedy: Specify local or on_line in the production_report section of Status data.
------------------------------
Code: 2110B175
Display: Part data load error
Used by:
Cause: Unable to load Part data.
Remedy: Check that Part data exists.
------------------------------
Code: 2110B176
Display: Can't expand program data.
Used by:
Cause: Cannot expand program data.
Remedy: Check and correct the production program.
------------------------------
Code: 21200EB0
Display: can't write runlevel_list_file /R0
Used by:
Cause: Data could not be written to the Run Level List file (R0/USER/r_list).
Remedy: Re-boot MCS.
------------------------------
Code: 2200750B
Display: DTX750B error
第 2115 页
Used by:
Cause: There is no transmit descriptor.
Remedy: Re-execute the function. If the error continues to occur, re-install the system.
------------------------------
Code: 22007511
Display: DTX7511 ERROR
Used by:
Cause: The program for which a download was requested could not be opened.
Remedy: The requested program does not exist in MCS. Use the error file directory to check the file.
------------------------------
Code: 22007512
Display: DTX7512 ERROR
Used by:
Cause: Transmission was made to the machine while the communication pipe was in use.
Remedy: Wait a while and try to download again. If the error recurs, re-boot MCS.
------------------------------
Code: 22007514
Display: DTX7514 ERROR
Used by:
Cause: The machine type is wrong.
Remedy: Check the transmission file (Program, Proper) machine types and compare them with the
previously transmitted machine types.
------------------------------
Code: 22007515
Display: DTX7515 error
Used by:
Cause: The program check discovered an error in the requested program.
Remedy: Request the program again. Check that there are no errors in the program.
------------------------------
Code: 2200AA00
Display: GDXAA00 ERROR or GXQAA00 ERROR
Used by:
Cause: The requested GD file or GQ file does not exist in MCS.
Remedy: Use the file services directory to check the file.
------------------------------
Code: 2200AB00
Display: DTXAB00 ERROR
Used by:
Cause: During downloading, an answer was not received from the machine within the preset time limit
(dT -> DTO).
Remedy: Check that the machine and MCS are both booted up (HELPS).
------------------------------
Code: 2200AB01
Display: DTXAB01 ERROR
Used by:
Cause: While the program was being downloaded, a communication error was returned from the
machine.
Remedy: Select the [Ctrl] and [E] keys from the UCI menu to get an error display. Refer to the errors from
the machine for more details.
------------------------------
Code: 2200AB02
第 2116 页