FUJI错误代码查询.pdf - 第1879页
Display: Pipe create error Used by: Cause: Unable to create jobcon pipe. Remedy: Re-boot MCS. ------------------------------ Code: 21003F70 Display: Line descriptor read error Used by: Cause: Unable to read the line desc…
Remedy: Re-boot MCS.
------------------------------
Code: 21003F60
Display: Pipe create error
Used by:
Cause: Unable to create Mother pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F61
Display: Pipe create error
Used by:
Cause: Unable to create pr pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F62
Display: Pipe create error
Used by:
Cause: Unable to create Analyze0 pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F63
Display: Pipe create error
Used by:
Cause: Unable to create Analyze1 pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F64
Display: Pipe create error
Used by:
Cause: Unable to create Line_mon0 pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F65
Display: Pipe create error
Used by:
Cause: Unable to create Logfile0 pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F66
Display: Pipe create error
Used by:
Cause: Unable to create Loglist0 pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F67
Display: Pipe create error
Used by:
Cause: Unable to create packing pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F68
第 1878 页
Display: Pipe create error
Used by:
Cause: Unable to create jobcon pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F70
Display: Line descriptor read error
Used by:
Cause: Unable to read the line descriptor.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F80
Display: M/C_No. pipe_No. Transmit channel create error
Used by:
Cause: Unable to open a monitor lead pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F90
Display: Login_Users link error
Used by:
Cause: The event link was opened incorrectly.
Remedy: Re-boot MCS.
------------------------------
Code: 21003FA0
Display: Pipe open error
Used by:
Cause: Unable to open Mother pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003FA1
Display: Pipe open error
Used by:
Cause: Unable to open transmit controller pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21003FA2
Display: Pipe open error
Used by:
Cause: Unable to open pr pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21005001
Display: Editer Discriptor open error
Used by:
Cause: A necessary file could not be opened while operating the editor.
Remedy: The direct startup command entered at the UCI menu was inappropriate so input again. If this
was entered through the command function keys, re-install the software.
------------------------------
Code: 21005002
Display: File discriptor open error
Used by:
第 1879 页
Cause: A file required by the Editor could not be opened.
Remedy: The necessary files in the editor could not be opened. Re-install the editor software. If the
problem persists contact Fuji.
------------------------------
Code: 21005003
Display: Message file open error
Used by:
Cause: A message file required by the Editor could not be opened.
Remedy: A file required by the editor could not be opened by the editor. Re-install the editor software. If
the problem persists contact Fuji.
------------------------------
Code: 21005101
Display: File open error.
Used by:
Cause: When the Editor was being started up, the specified file could not be opened.
Remedy: The specified file was not created by the editor, so it could not be specified. Specify a separate
file.
------------------------------
Code: 21005102
Display: file write error
Used by:
Cause: File could not be written.
Remedy: Check whether the file write protector is on.
------------------------------
Code: 21005103
Display: Invalid filename
Used by:
Cause: An invalid filename was used.
Remedy: Input a valid filename.
------------------------------
Code: 21005104
Display: Disk_drive not ready
Used by:
Cause: The disk drive has not been prepared.
Remedy: The floppy disk has not been set. Check the floppy disk.
------------------------------
Code: 21005105
Display: Reading file; can't execute command yet.
Used by:
Cause: The edit file is reading the memory.
Remedy: The command cannot be executed until the edit file finishes reading the memory.
------------------------------
Code: 21005200
Display: can't execute command
Used by:
Cause: The command just given does not exist.
Remedy: Check the input command, and re-input.
------------------------------
Code: 21005201
Display: syntax error
Used by:
第 1880 页