FUJI错误代码查询.pdf - 第879页

damaged. ------------------------------ Code: 1211007b Display: Machine type error. Used by: Cause: This function can only be called in a machine with an analog environment. Remedy: Reinstall the software, because the in…

100%1 / 5282
Remedy: The servo controller could be damaged. Obtain the trace data and contact Fuji.
------------------------------
Code: 12110074
Display: SERCOS communication error.
Used by:
Cause: An error has occurred during IDN SERCOS communication.
Remedy: Ensure that the digital operator is not connected to an amplifier. If this error cannot be
corrected, obtain the trace data and contact Fuji. In such a situation, the SERCOS drive could be
damaged.
------------------------------
Code: 12110075
Display: Zero setting error.
Used by:
Cause: An invalid zero setting type is specified.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12110076
Display: Axis movement processing error.
Used by:
Cause: During axis movement, another process occurred.
Remedy: Reinstall the software, because the initial installation could have failed.
------------------------------
Code: 12110077
Display: Servo parameter error.
Used by:
Cause: Failed to set a parameter on the servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji. In such a situation, the
servo controller board could be damaged.
------------------------------
Code: 12110078
Display: Servo parameter error.
Used by:
Cause: Failed to acquire a servo parameter from the servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji. In such a situation, the
servo controller board could be damaged.
------------------------------
Code: 12110079
Display: Compare position registration error.
Used by:
Cause: The specified compare position object is not registered.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 1211007a
Display: SERCOS communication error.
Used by:
Cause: An error occurred during SERCOS communication.
Remedy: Ensure that the digital operator is not connected to an amplifier. If this error cannot be
corrected, obtain the trace data and contact Fuji. In such a situation, the SERCOS drive could be
第 878 页
damaged.
------------------------------
Code: 1211007b
Display: Machine type error.
Used by:
Cause: This function can only be called in a machine with an analog environment.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 1211007c
Display: Machine type error.
Used by:
Cause: This function can only be called in a machine with an SERCOS environment.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 1211007d
Display: Movement interpolation error.
Used by:
Cause: Movement interpolation has occurred for the same axis.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 1211007e
Display: Movement interpolation error.
Used by:
Cause: For the selected axes, movement interpolation cannot be be done because the axes are not on the
same servo controller board.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 1211007f
Display: Process error.
Used by:
Cause: A function only supported by the RTX process was called.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 12110080
Display: Process error.
Used by:
Cause: A function only supported by the Win32 process was called.
Remedy: Reinstall the software, because the initial installation could have failed.
If this error cannot be corrected, obtain the trace data and contact Fuji.
------------------------------
Code: 12110081
Display: Axes stop demand.
Used by:
Cause: The axis movement was stopped by the application.
Remedy: Remove the cause of the error and resume operation.
------------------------------
第 879 页
Code: 12111001
Display: Command error.
Used by:
Cause: A command which can not be recognized was send to the conveyor control board.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111002
Display: Data error.
Used by:
Cause: Incorrect data was send to the conveyor control board.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111003
Display: CRC error.
Used by:
Cause: An error has occurred during communication.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111004
Display: Cover opening.
Used by:
Cause: Conveyor's cover is open.
Remedy: Closing a conveyor's cover.
------------------------------
Code: 12111005
Display: Emergency Stop.
Used by:
Cause: The emergency stop button was pressed.
Remedy: Reset the emergency stop button.
------------------------------
Code: 12111006
Display: Encoder error.
Used by:
Cause: The battery of the encoder for the backup fell to equal to or less than 2.8 V.
Remedy: Contact Fuji. Because there is possibility that the position data of the encoder disappeared.
------------------------------
Code: 12111007
Display: Battery error.
Used by:
Cause: The battery of the encoder for the backup fell to equal to or less than 3.0 V.
Remedy: Exchange a battery of the encoder for the backup.
------------------------------
Code: 12111009
Display: Conveyor's width error.
Used by:
Cause: Conveyor's width which crosses a maximum or a minimum value was set.
Remedy: After confirming a maximum and a minimum value, input once more.
------------------------------
第 880 页