FUJI错误代码查询.pdf - 第191页

Cause: Remedy: ------------------------------ Code: 11074100 Display: Used by: IP2 Cause: The MTU [EMERGENCY STOP] button has been pressed. Remedy: Cancel the MTU [EMERGENCY STOP] button. ------------------------------ C…

100%1 / 5282
Code: 11060406
Display:
Used by:
Cause: During partial transmission, device data was added.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060407
Display:
Used by:
Cause: During partial transmission, tray data was added.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060408
Display:
Used by:
Cause: Tray data was sent even though tray data is not registered.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060409
Display:
Used by:
Cause: Device data was sent even though device data is not registered.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 1106040A
Display:
Used by:
Cause: The number of elements in element data has exceeded the limit.
Remedy: None.
------------------------------
Code: 11060500
Display:
Used by:
Cause: A command to start data check was sent during data check.
Remedy: None.
------------------------------
Code: 11060501
Display:
Used by:
Cause: A checksum error occurred during data transmission.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060502
Display:
Used by:
Cause: A character number check error occurred during data transmission.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060600
Display:
Used by:
第 190 页
Cause:
Remedy:
------------------------------
Code: 11074100
Display:
Used by: IP2
Cause: The MTU [EMERGENCY STOP] button has been pressed.
Remedy: Cancel the MTU [EMERGENCY STOP] button.
------------------------------
Code: 11074110
Display:
Used by: IP2
Cause: A servo alarm has occurred.
Remedy: Check that the load on each servo axis is not too high.
------------------------------
Code: 11074120
Display:
Used by: IP2
Cause: A safety door is open.
Remedy: Close all safety doors.
------------------------------
Code: 11074130
Display:
Used by: IP2
Cause: A cycle alarm is occurring.
Remedy: A command to move was made, but the arrival check sensor did not turn on within the preset
time.
------------------------------
Code: 11074141
Display:
Used by: IP2
Cause: Overtravel X+ alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074142
Display:
Used by: IP2
Cause: Overtravel X- alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074143
Display:
Used by: IP2
Cause: Overtravel Y+ alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074144
Display:
Used by: IP2
Cause: There is overtravel in the -Y axis.
Remedy: Operate the machine with the overtravel sensor removed.
第 191 页
------------------------------
Code: 11074145
Display:
Used by: IP2
Cause: Overtravel T+ NG
Remedy: Move the appropriate part of the machine away from the overtravel sensor.
------------------------------
Code: 11074146
Display:
Used by: IP2
Cause: Overtravel T- NG
Remedy: Move the appropriate part of the machine away from the overtravel sensor.
------------------------------
Code: 11074150
Display:
Used by: IP2
Cause: The 200V power supply was not on.
Remedy: Turn on the 200V power supply.
------------------------------
Code: 11074200
Display:
Used by: IP2
Cause: MTU is in OFF_LINE mode.
Remedy: Put MTU into ON_LINE mode.
------------------------------
Code: 11074201
Display:
Used by: IP2
Cause: MTU is in ON_LINE mode.
Remedy: Put MTU into OFF_LINE mode.
------------------------------
Code: 11074210
Display:
Used by:
Cause: Proper data could not be transmitted to the MTU.
Remedy: Retransmit Proper data.
------------------------------
Code: 11074220
Display:
Used by: IP2
Cause: Zero setting was not properly finished.
Remedy: Re-perform zero setting.
------------------------------
Code: 11074230
Display:
Used by: IP2
Cause: The specified tray number is out of range.
Remedy: Check the tray specifications.
------------------------------
Code: 11074240
Display:
第 192 页