FUJI错误代码查询.pdf - 第2331页
Display: 与编码相同。 Used by: XP Cause: 指令正常结束。或者指令正常启动（没有结束的模式的时候）。 Remedy: ------------------------------ Code: 53??0001 Display: 与编码相同。 Used by: XP Cause: 指令的格式可能有下列错误。 ·子指令名错误。 ·变数的个数错误。 ·在选项变数中指定了不被许可的选项。 Remedy: 请检查在指令格…
Used by:
Cause: "UNIT", "PARTS" is entered in the production program but it is not used and not referred to in the
device line.
Remedy: When the number of entries for unused "UNIT", "PARTS" is high, an error may occur when
downloading.
------------------------------
Code: 52??5110
Display: Block description is omitted.
Used by:
Cause: There is no "BLOCK" line for the block being reported. When downloading, the data for the
applicable block takes its default values.
Remedy: Check the block settings. If necessary, input the "BLOCK" line.
------------------------------
Code: 52??5111
Display: Block is multiply defined.
Used by:
Cause: The "BLOCK" line for the block being reported is multiply defined.
Remedy: Check the block settings.
------------------------------
Code: 52??5112
Display: Unknown block.
Used by:
Cause: This is an unknown block.
Remedy: Generally this is caused by an error in another block's name. Check the reported block name.
------------------------------
Code: 52??5113
Display: Unnecessary block for this machine type.
Used by:
Cause: This block is not used in the corresponding machine type and is therefore unnecessary. This
report is made if the machine type has no device lines and "BLOCK", "DEVICE+" in "UNIT", "PROGRAM" is
input. This report is made if the machine type has no sequence lines
and"BLOCK","SEQUENCE+"in"UNIT","PROGRAM"is input. This report is made if the machine type has not
GSS data lines and"BLOCK","SOLDER"or"BLOCK","SOLCO"in"UNIT","PROGRAM"is input.
Remedy:
------------------------------
Code: 52??5114
Display: Unnecessary block.
Used by:
Cause: There is a "BLOCK" in device data which is not referred to from sequence data. This report is
made if "BLOCK", "DEVICE+" is input for a production program in which there are no entries in the device
line in sequence data.
Remedy:
------------------------------
Code: 52??5120
Display: Unused GSS data element.
Used by:
Cause: This error is reported if there is an element in GSS data which is not referenced from the
sequence data and is,therefore,unnecessary.
Remedy:
------------------------------
Code: 53??0000
第 2330 页
Display: 与编码相同。
Used by: XP
Cause: 指令正常结束。或者指令正常启动（没有结束的模式的时候）。
Remedy:
------------------------------
Code: 53??0001
Display: 与编码相同。
Used by: XP
Cause: 指令的格式可能有下列错误。
·子指令名错误。
·变数的个数错误。
·在选项变数中指定了不被许可的选项。
Remedy: 请检查在指令格式中是否有错误。
------------------------------
Code: 53??0002
Display: 与编码相同。
Used by: XP
Cause: 别名错误。
Remedy: 请确认别名的指定。
------------------------------
Code: 53??0022
Display: 与编码相同。
Used by: XP
Cause: 已存在指定的文件。
Remedy: 请确认文件名的指定。如果可以改写的话，请指定改写的对象并重新执行指令。
------------------------------
Code: 53??0061
Display: 与编码相同。
Used by: XP
Cause: 从机器处传出了异常应答。异常内容由补充信息所通知。
Remedy: 请通过补充信息调查所通知的错误编码后进行数据修正或其他必要的处理。
------------------------------
Code: 53??0065
Display: 与编码相同。
Used by: XP
Cause: 所指定的程序在机器中不存在。
Remedy: 请确认文件名的指定。
------------------------------
Code: 53??0068
Display: 与编码相同。
Used by: XP
Cause: 在指定为删除的程序中、有不能删除的程序。
Remedy:
------------------------------
Code: 53??0069
Display: 与编码相同。
Used by: XP
Cause: 指定为删除的程序在机器中不存在。或者在被指定为删除的几个程序中有不存在于机器中的程序。
Remedy: 请确认文件名的指定。
------------------------------
Code: 53??0085
第 2331 页
Display: 与编码相同。
Used by: XP
Cause: 未找到指定程序的元件使用预定数报告。
Remedy: 请确认文件名的指定。
------------------------------
Code: 53??4015
Display: 与编码相同。
Used by: XP
Cause: 由于内存量不足，所以不能确保必要容量的内存量。
Remedy: 请增加存储器。或者停止消费量大的处理的执行。请将不要的模块从内存中解除。
------------------------------
Code: 53??4021
Display: 与编码相同。
Used by: XP
Cause: 根据机器一侧的情况取消了远程控制指令。
Remedy: 机器侧的文件参考处理结束后，请重新执行指令。
------------------------------
Code: 53??E001
Display: 与编码相同。
Used by: XP
Cause: 应该启动的处理未被启动。
Remedy: 请重新打开电源。
------------------------------
Code: 53??EEEE
Display: 与编码相同。
Used by: XP
Cause: 正在执行指令。
Remedy:
------------------------------
Code: 60000001
Display: ユーザー名不一致
Used by: 无し
Cause: 予约
Remedy: 予约
------------------------------
Code: 60000002
Display: パスワード不一致
Used by: 无し
Cause: 予约
Remedy: 予约
------------------------------
Code: 60000003
Display: その他エラー
Used by: 无し
Cause: 予约
Remedy: 予约
------------------------------
Code: 60000004
Display: その他エラー(起动权限なし)
Used by: 无し
Cause: 予约
第 2332 页