FUJI错误代码查询.pdf - 第1867页

Code: 21003C05 Display: Memory allocation error Used by: Cause: Memory could not be allocated. Remedy: Re-execute the function. If it still doesn't work reboot MCS. ------------------------------ Code: 21003C06 Disp…

100%1 / 5282
Cause: Data could not be written to the print file.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 21003B02
Display: CRT initialize error
Used by:
Cause: The terminal could not be initialized.
Remedy: Contact Fuji.
------------------------------
Code: 21003B03
Display: Help file <%s> not found
Used by:
Cause: The help file does not exist.
Remedy: Re-install the system.
------------------------------
Code: 21003B04
Display: Help file read error
Used by:
Cause: The help file could not be read.
Remedy: Re-install the system.
------------------------------
Code: 21003C00
Display: Illegal parameter
Used by:
Cause: Illegal parameters were used at start-up.
Remedy: Re-execute the function.
------------------------------
Code: 21003C01
Display: Strings file set error
Used by:
Cause: String file expander error.
Remedy: Re-install the expander software.
------------------------------
Code: 21003C02
Display: CRT event link error
Used by:
Cause: There was a CRT event link error.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C03
Display: Terminal pipe set error
Used by:
Cause: The terminal pipe was not correctly set.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C04
Display: Status work directory create error
Used by:
Cause: The status work directory could not be created.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
第 1866 页
Code: 21003C05
Display: Memory allocation error
Used by:
Cause: Memory could not be allocated.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C06
Display: Procs fork error system ()
Used by:
Cause: The Procs command was in error during start-up.
Remedy: Re-execute the function. If it still doesn't work reboot MCS. If it still doesn't work re-install the
software.
------------------------------
Code: 21003C07
Display: Process file open error
Used by:
Cause: The original process display file could not be opened.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C08
Display: Process file read error
Used by:
Cause: The original process display file could not be read.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C09
Display: Dir fork error system ()
Used by:
Cause: The dir command would not work at start-up.
Remedy: Re-execute the function. If it still doesn't work reboot MCS. If it still doesn't work re-install the
software.
------------------------------
Code: 21003C0A
Display: Pipe file open error
Used by:
Cause: The original pipe display file could not be opened.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C0B
Display: Pipe file read error
Used by:
Cause: The original pipe display file could not be read.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C0C
Display: Pipe open error
Used by:
Cause: The process pipe could not be opened.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C0D
第 1867 页
Display: m2_disks() read error
Used by:
Cause: The active disk could not be read
Remedy: Check the partitioned file "active_disc" heading, and read again.
------------------------------
Code: 21003C0E
Display: Mfree fork error system().
Used by:
Cause: mfree command start error.
Remedy: Re-execute the command and if the problem persists, reboot the MCS. If the error remains
following this, re-install the software.
------------------------------
Code: 21003C0F
Display: Memory file open error
Used by:
Cause: The memory file could not be opened.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C10
Display: Memory file read error
Used by:
Cause: The memory file could not be read.
Remedy: Contact Fuji.
------------------------------
Code: 21003C11
Display: Line Descriptor read error.
Used by:
Cause: Line descriptor read error.
Remedy: Check the line descriptor. If there are no mistakes but the error still persists, delete the file and
then regenerate it.
------------------------------
Code: 21003C12
Display: Dcheck fork error system().
Used by:
Cause: The dcheck command could not be started.
Remedy: Re-execute the command but if the error persists reboot the MCS. If the error still persists re-
install the software.
------------------------------
Code: 21003C13
Display: Dcheck file open error.
Used by:
Cause: Disk check file open error.
Remedy: Reboot the MCS.
------------------------------
Code: 21003C14
Display: Dcheck file read error.
Used by:
Cause: Disk check file read error.
Remedy: Reboot the MCS.
------------------------------
Code: 21003C60
第 1868 页