FUJI错误代码查询.pdf - 第2032页
Code: 2100B1A4 Display: Device error file creat error Used by: Cause: Unable to create the device error file. Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the evaluation time…
Code: 2100B19C
Display: Mainte Device error tmp file creat error
Used by:
Cause: Unable to create the maintenance device error temporary file.
Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the
evaluation time.
------------------------------
Code: 2100B19D
Display: Mainte Device error tmp file open error
Used by:
Cause: Unable to open the maintenance device error temporary file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B19E
Display: Mainte Device error tmp file read error
Used by:
Cause: Unable to read the maintenance device error temporary file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B19F
Display: Mainte Device error tmp file write error
Used by:
Cause: Unable to write to the maintenance device error temporary file.
Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the
evaluation time.
------------------------------
Code: 2100B1A0
Display: Device error total file creat error
Used by:
Cause: Unable to create the device error total file.
Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the
evaluation time.
------------------------------
Code: 2100B1A1
Display: Device error total file open error
Used by:
Cause: Unable to open the device error total file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B1A2
Display: Device error total file read error
Used by:
Cause: Unable to read the device error total file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B1A3
Display: Device error total file write error
Used by:
Cause: Unable to write to the device error total file.
Remedy: Evaluate and correct the file.
------------------------------
第 2031 页
Code: 2100B1A4
Display: Device error file creat error
Used by:
Cause: Unable to create the device error file.
Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the
evaluation time.
------------------------------
Code: 2100B1A5
Display: Device error file open error
Used by:
Cause: Unable to open the device error file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B1A6
Display: Device error file read error
Used by:
Cause: Unable to read the device error file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B1A7
Display: Device error file write error
Used by:
Cause: Unable to write to the device error file.
Remedy: Evaluate and correct the file.
------------------------------
Code: 2100B1A8
Display: History print file creat error.
Used by:
Cause: The history print file could not be created due to a lack of RAM.
Remedy: Re-execute the function. If the problem recurs, re-boot MCS.
------------------------------
Code: 2100B1A9
Display: History print file write error.
Used by:
Cause: The history print file could not be written to due to a lack of RAM.
Remedy: Re-execute the function. If the problem recurs, re-boot MCS.
------------------------------
Code: 2100B1AA
Display: command error
Used by:
Cause: The command could not be executed.
Remedy: Check that the file partitions are in execution format. Check that the file exists. If it does not,
re-install the software.
------------------------------
Code: 2100B1AB
Display: Loading error occurred - program may be destroyed!
Used by:
Cause: Too many commands are being executed in the program. The command cannot be executed.
Remedy: Re-execute the function. If the error recurs, wait for the other commands to finish. Then
execute the function.
------------------------------
第 2032 页
Code: 2100B1AC
Display: not enough memory !
Used by:
Cause: The command cannot execute because of a shortage of memory.
Remedy: Execute the command after other commands are finished.
------------------------------
Code: 2100B1AD
Display: not found.
Used by:
Cause: The command does not exist.
Remedy: Check that the command was input correctly.
------------------------------
Code: 2100B1B3
Display: Undecided nozzle size for FCP6.
Used by:
Cause: An attempt was made to acquire a nozzle number from the nozzle assignment table but the nozzle
size set in Part data could not be found.
Remedy: Return to the nozzle assignment table, the Part data and the production program used during
production and then re-execute the Analyzer.
------------------------------
Code: 2100B1B4
Display: Coplanarity display file create error.
Used by:
Cause: The directory for creating the file used to display the results of the coplanarity check does not
exist.
Remedy: After completing the operation presently being executed, select "NO" at the analyzer screen to
end. Return to the UCI screen and re-execute the analyzer.
------------------------------
Code: 2100B1B5
Display: Coplanarity display file open error.
Used by:
Cause: The file for displaying the coplanarity check results cannot be opened.
Remedy: At the analyzer screen select "NO" to end, return to the UCI screen, and re-execute the analyzer.
------------------------------
Code: 2100B1B6
Display: Coplanarity display file read error.
Used by:
Cause: The file for displaying the coplanarity check results cannot be read.
Remedy: Select "NO" to end at the analyzer screen, return to the UCI screen, and re-execute the analyzer.
------------------------------
Code: 2100B1B7
Display: Coplanarity display file write error.
Used by:
Cause: Data cannot be written to the file for displaying the results of the coplanarity check.
Remedy: After completing the operation presently being executed, select "NO" at the analyzer screen to
end. Return to the UCI screen and re-execute the analyzer. Alternatively shorten the time frame being
analyzed.
------------------------------
Code: 2100B1B8
Display: Mainte coplanarity work file create error.
Used by:
第 2033 页