FUJI错误代码查询.pdf - 第2254页
------------------------------ Code: 51??5006 Display: Same line multiply defined in multiple item data. Used by: Cause: In multiple item data, a line with the same number has been multiply defined. When downloading, the…
verification is executed within a set amount of time.
------------------------------
Code: 51??4040
Display: Remote command deletion has been cancelled.
Used by:
Cause: While waiting for a response with regards to the deletion of the targeted remote command, the
completion of the command was reported from the machine prior to deletion.
Remedy:
------------------------------
Code: 51??4041
Display: Cell status has not been decided.
Used by:
Cause: Publication of a notice has been executed for a machine which has an undecided cell status.
Remedy: Perform a cell status request.
------------------------------
Code: 51??5001
Display: Undefined item.
Used by:
Cause: The reported item is undefined and has been assigned a default value. In the case of multiple
item data, the item names have been omitted from the item definition line.
Remedy: If it is necessary to set the reported item to something other than its default value, enter the
value.
------------------------------
Code: 51??5002
Display: Multiply defined item.
Used by:
Cause: The reported item is multiply defined. An item name has been multiply defined at the item
definition line in multiple item data.
Remedy: Generally this is caused by an error in the definition of one of the item names. Check the names
and values of the reported items.
------------------------------
Code: 51??5003
Display: Unknown item.
Used by:
Cause: The item which was entered is not known.
Remedy: This error is generally caused by the incorrect entry of an item's name. Check the name of the
reported item.
------------------------------
Code: 51??5004
Display: Additional unknown items.
Used by:
Cause: There are further unknown items but they cannot be displayed.
Remedy: There are too many unknown item names. Check the content of the file. The definition for the
machine-type name may be incorrect.
------------------------------
Code: 51??5005
Display: Values omitted from multiple item data.
Used by:
Cause: In multiple item data, the item name is defined at the item definition line but data is omitted from
the data lines.
Remedy: Check the data line settings.
第 2253 页
------------------------------
Code: 51??5006
Display: Same line multiply defined in multiple item data.
Used by:
Cause: In multiple item data, a line with the same number has been multiply defined. When
downloading, the first of the data lines is taken as being the valid data line.
Remedy: Check the data line settings.
------------------------------
Code: 51??5010
Display: Values for size defining items are incorrect or they have been omitted.
Used by:
Cause: The entries for the items "DEV_NUM", "EL_NUM" or "TRAY_NUM" in "UNIT", "PROGRAM" -
"BLOCK", "HEADER" for SMD3 compatible machines have either been omitted or they are incorrect.
Correct values are reported together with the item names. Unnecessary items are not reported to the
applicable machine. When downloading, the program size is calculated using the registered values.
However, if values which exceed the maximum permissible are entered, they are changed to the maximum
and the program size is calculated.
Remedy: Check the entries for the relevant items in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 51??5100
Display: Meaningless unit.
Used by:
Cause: Although this entry is not correct it is ignored when the program is downloaded. This error may
occur in the following cases. A unit name other than "UNIT", "MARK" or "UNIT", "NOZZLE" is entered prior
to "UNIT", "PROGRAM". A unit name other than "UNIT", "PARTS" is entered prior to "UNIT", "PROGRAM".
Remedy: Check the entries for the production program.
------------------------------
Code: 51??5101
Display: Unused "UNIT", "PARTS".
Used by:
Cause: "UNIT", "PARTS" is entered in the production program but it is not used and not referred to in the
device line.
Remedy: When the number of entries for unused "UNIT", "PARTS" is high, an error may occur when
downloading.
------------------------------
Code: 51??5110
Display: Block description is omitted.
Used by:
Cause: There is no "BLOCK" line for the block being reported. When downloading, the data for the
applicable block takes its default values.
Remedy: Check the block settings. If necessary, input the "BLOCK" line.
------------------------------
Code: 51??5111
Display: Block is multiply defined.
Used by:
Cause: The "BLOCK" line for the block being reported is multiply defined.
Remedy: Check the block settings.
------------------------------
Code: 51??5112
Display: Unknown block.
第 2254 页
Used by:
Cause: This is an unknown block.
Remedy: Generally this is caused by an error in another block's name. Check the reported block name.
------------------------------
Code: 51??5113
Display: Unnecessary block for this machine type.
Used by:
Cause: This block is not used in the corresponding machine type and is therefore unnecessary. This
report is made if the machine type has no device lines and "BLOCK", "DEVICE+" in "UNIT", "PROGRAM" is
input. This report is made if the machine type has no sequence lines
and"BLOCK","SEQUENCE+"in"UNIT","PROGRAM"is input. This report is made if the machine type has not
GSS data lines and"BLOCK","SOLDER"or"BLOCK","SOLCO"in"UNIT","PROGRAM"is input.
Remedy:
------------------------------
Code: 51??5114
Display: Unnecessary block.
Used by:
Cause: There is a "BLOCK" in device data which is not referred to from sequence data. This report is
made if "BLOCK", "DEVICE+" is input for a production program in which there are no entries in the device
line in sequence data.
Remedy:
------------------------------
Code: 51??5120
Display: Unused GSS data element.
Used by:
Cause: This error is reported if there is an element in GSS data which is not referenced from the
sequence data and is,therefore,unnecessary.
Remedy:
------------------------------
Code: 52??0000
Display: Normal ending or normal start.
Used by:
Cause: The command was completed normally or started normally (when using immediate return mode).
Remedy:
------------------------------
Code: 52??0001
Display: Command format error.
Used by:
Cause: One of the following mistakes has been made in the format of the command. Either the
subcommand name is incorrect, the number of arguments is incorrect or an invalid argument has been
specified as the option argument.
Remedy: Check that there are no mistakes in the command format.
------------------------------
Code: 52??0002
Display: Nickname error.
Used by:
Cause: The nickname is incorrect.
Remedy: Check the specified nickname.
------------------------------
Code: 52??0003
Display: Either the file name or path name is too long.
第 2255 页