FUJI错误代码查询.pdf - 第1869页

Display: Illegal parameter Used by: Cause: An illegal (device) parameter was used. Remedy: Correct the device settings. ------------------------------ Code: 21003C61 Display: Illegal parameter option Used by: Cause: Ille…

100%1 / 5282
Display: m2_disks() read error
Used by:
Cause: The active disk could not be read
Remedy: Check the partitioned file "active_disc" heading, and read again.
------------------------------
Code: 21003C0E
Display: Mfree fork error system().
Used by:
Cause: mfree command start error.
Remedy: Re-execute the command and if the problem persists, reboot the MCS. If the error remains
following this, re-install the software.
------------------------------
Code: 21003C0F
Display: Memory file open error
Used by:
Cause: The memory file could not be opened.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C10
Display: Memory file read error
Used by:
Cause: The memory file could not be read.
Remedy: Contact Fuji.
------------------------------
Code: 21003C11
Display: Line Descriptor read error.
Used by:
Cause: Line descriptor read error.
Remedy: Check the line descriptor. If there are no mistakes but the error still persists, delete the file and
then regenerate it.
------------------------------
Code: 21003C12
Display: Dcheck fork error system().
Used by:
Cause: The dcheck command could not be started.
Remedy: Re-execute the command but if the error persists reboot the MCS. If the error still persists re-
install the software.
------------------------------
Code: 21003C13
Display: Dcheck file open error.
Used by:
Cause: Disk check file open error.
Remedy: Reboot the MCS.
------------------------------
Code: 21003C14
Display: Dcheck file read error.
Used by:
Cause: Disk check file read error.
Remedy: Reboot the MCS.
------------------------------
Code: 21003C60
第 1868 页
Display: Illegal parameter
Used by:
Cause: An illegal (device) parameter was used.
Remedy: Correct the device settings.
------------------------------
Code: 21003C61
Display: Illegal parameter option
Used by:
Cause: Illegal parameter option.
Remedy: When startup is done directly, correct the option settings.
------------------------------
Code: 21003C62
Display: message file read error
Used by:
Cause: Message file read error.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21003C63
Display: terminal read pipe file open error
Used by:
Cause: Unable to open the terminal read pipe.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C64
Display: terminal write pipe file open error
Used by:
Cause: Unable to open the terminal write pipe.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C65
Display: CRT event link error
Used by:
Cause: The CRT event could not be linked.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C66
Display: Device parameter error
Used by:
Cause: The specified device does not exist.
Remedy: Check the device specifications.
------------------------------
Code: 21003C67
Display: Cleaning error
Used by:
Cause: Unable to perform cleaning.
Remedy: Try again from the beginning.
------------------------------
Code: 21003C68
Display: Device not ready
Used by:
Cause: The device is not yet set.
第 1869 页
Remedy: Set the device.
------------------------------
Code: 21003C69
Display: Module not found
Used by:
Cause: The file does not exist.
Remedy: Re-install the software.
------------------------------
Code: 21003CA0
Display: Illegal parameter
Used by:
Cause: A startup parameter is incorrect.
Remedy: Re-execute the function. If a direct startup is being performed, correct the input parameter.
------------------------------
Code: 21003CA1
Display: Illegal parameter option
Used by:
Cause: A startup option is incorrect.
Remedy: If a direct startup is performed, correct the specified option.
------------------------------
Code: 21003CA2
Display: Can't processing on fore ground
Used by:
Cause: Cannot startup on the foreground.
Remedy: Startup on the background.
------------------------------
Code: 21003CA3
Display: Message file read error
Used by:
Cause: Unable to read message file.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 21003CA4
Display: File not found
Used by:
Cause: The file to be deleted was not found.
Remedy: As this file was to be destroyed anyway, this is not a problem.
------------------------------
Code: 21003CA5
Display: File open error
Used by:
Cause: Unable to open file.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA6
Display: File write error
Used by:
Cause: Unable to write to file.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA7
第 1870 页