FUJI错误代码查询.pdf - 第459页
Display: SMI creation error Used by: Cause: An error occurred due to a lack of memory and duplicated settings when the TC8577 (SMI) driver was generated. This error occurred when Fuji OS system call_create_smi() was used…
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037201
Display: CPU CH2 creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's channel 2 serial port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037202
Display: PIA PRN creation error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory in the machine control software. This error occurred
when Fuji OS system call_create_cpu_com() which automatically generates communication drivers for a 16
or 32 bit CPU board's parallel port was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 12037203
Display: CPU board type error
Used by: CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: This CPU board type is not automatically generated. This error occurred when Fuji OS system
call_create_cpu_com() was used.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203721?
Display: ACIA creation error
Used by: CP5,CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when the MC6850 (ACIA)
driver was generated. This error occurred when Fuji OS system call_create_acia() was used. The last
number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203722?
Display: ACIA DBG creation error
Used by: CP642,GP6,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC6850 (ACIA). This error occurred when Fuji OS system call_create_acia_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203723?
第 458 页
Display: SMI creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when the TC8577 (SMI) driver
was generated. This error occurred when Fuji OS system call_create_smi() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203724?
Display: SMI DBG creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC8577 (ACIA). This error occurred when Fuji OS system call_create_smi_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203725?
Display: ARCNET creation error
Used by: CP3,CP5,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory and duplicated settings when the ARCNET driver was
generated. This error occurred when Fuji OS system call_create_arcnet() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203726?
Display: PIA PRN creation error
Used by: CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
create the driver for the PIA (MC6821) printer port. This error occurred when Fuji OS system
call_create_pia_prn() was used. The last number in the error code indicates the unit in which the error
occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203727?
Display: SECS/GEM creation error
Used by: CP642,CP643,QP242,QP201,QP202,QP203,GP6
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the SECS/GEM driver. This error occurred when Fuji OS system call_create_vme132() was used.
The last number in the error code indicates the unit number in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203728?
Display: VM1440 creation error
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP132
Cause: The machine control software failed to boot up the first 6 channel communications board. This
may be caused by insufficient memory or overlapping settings for that board. The final digit of the error
code indicates the device in question.
第 459 页
Remedy: Ensure there is no overlapping of settings (i.e., the same port is used for connection to more
than one peripheral) and that all Proper data settings are within the acceptable range. Also check that the
6 channel board (VM1440/FH1016) is in correct working order.
------------------------------
Code: 1203729?
Display: VM1440 creation error
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,GL541,GP551,GP6,QP132
Cause: The machine control software failed to boot up the second 6 channel communications board.
This may be caused by insufficient memory or overlapping settings for that board. The final digit of the
error code indicates the device in question.
Remedy: Ensure there is no overlapping of settings (i.e., the same port is used for connection to more
than one peripheral) and that all Proper data settings are within the acceptable range. Also check that the
6 channel board (VM1440/FH1016) is in correct working order.
------------------------------
Code: 120372A?
Display: VME070 creation error
Used by: CP3,CP4-1,CP4-2,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the first driver for the 4 channel communication board. This error occurred when Fuji OS
system call_create_070() was used. The last number in the error code indicates the unit number in which
the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372B?
Display: VME070 creation error
Used by: CP3,CP4-1,CP4-2,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the second driver for the 4 channel communication board. This error occurred when Fuji OS
system call_create_070() was used. The last number in the error code indicates the unit number in which
the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372C?
Display: LCU ARCNET creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the ARCNET driver for LCU. This error occurred when Fuji OS system call_create_lcuarc() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372D?
Display: COM20020B creation error
Used by: QP242,QP201,QP202,QP203
Cause: The ARCNET driver could not be generated by the FUJI OS System Call_create_20020B() in the
machine software's internal processing due to a problem such as insufficient memory or multiple settings.
The last digit of the error code represents the number of units whose generation was attempted. (?
represents the unit number.)
Remedy: Boot up the machine using the reset-start procedure. If the machine still does not work properly
第 460 页