FUJI错误代码查询.pdf - 第1860页
Display: Parts side & appearance data read error Used by: Cause: There was a parts side and appearance data read error. Remedy: Check the Part data file. If the Part data file is correct, re-boot the system. --------…
compatible versions.
------------------------------
Code: 21002001
Display: in_out path change error
Used by:
Cause: Unable to change the input path.
Remedy: Re-boot the system.
------------------------------
Code: 21002002
Display: Message file set error
Used by:
Cause: Unable to set the message file.
Remedy: Re-boot the system. If the problem recurs re-install the system.
------------------------------
Code: 21002003
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot the system.
------------------------------
Code: 21002004
Display: PD file open error
Used by:
Cause: Unable to open the Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002005
Display: PD file header read error
Used by:
Cause: Unable to read the Part data header.
Remedy: If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002006
Display: No support parts type
Used by:
Cause: The part type is unsupported.
Remedy: Check the Part data computer vision number.
------------------------------
Code: 21002007
Display: PD file not found
Used by:
Cause: There is no Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002008
Display: Parts vision data read error
Used by:
Cause: There was a vision data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002009
第 1859 页
Display: Parts side & appearance data read error
Used by:
Cause: There was a parts side and appearance data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200A
Display: PD file offset table read error
Used by:
Cause: There was a Part data file offset table read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200B
Display: This device no elements
Used by:
Cause: This device has no elements.
Remedy: Check the Part data clearance.
------------------------------
Code: 2100200C
Display: GD file create error
Used by:
Cause: There was a GD file create error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200D
Display: GD file write error
Used by:
Cause: There was a GD file write error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200E
Display: TOO large nozzle diameter
Used by:
Cause: The nozzle diameter is too large.
Remedy: Check the nozzle diameter settings in Part data.
------------------------------
Code: 2100200F
Display: GD file protect error
Used by:
Cause: The file created at the GD editor could not automatically create GDs. When creating GDs cancel
the write protect function at the GD editor.
Remedy: When creating GDs cancel the write protect function at the GD editor.
------------------------------
Code: 21002010
Display: Parts carry data read error
Used by:
Cause: There was a carrying data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002011
Display: Parts tolerance information data read error
Used by:
第 1860 页
Cause: There was a tolerance information data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002012
Display: Parts gd information data read error
Used by:
Cause: There was a GD information data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002013
Display: Parts Data read error
Used by:
Cause: Part data cannot be read because it is corrupted.
Remedy: Install the correct disk.
------------------------------
Code: 21002014
Display: Media full
Used by:
Cause: Same as the code.
Remedy: Install a disk which has enough space.
------------------------------
Code: 21002015
Display: Device not ready
Used by:
Cause: Same as the code.
Remedy: Install the correct disk.
------------------------------
Code: 21002016
Display: Bad type media
Used by:
Cause: Same as the code.
Remedy: Check the disk format.
------------------------------
Code: 21002017
Display: Not found
Used by:
Cause: Same as the code
Remedy: Install the correct disk and check the directory.
------------------------------
Code: 21002018
Display: Write protect
Used by:
Cause: Same as the code
Remedy: Release the write protection.
------------------------------
Code: 21002101
Display: Illigal parameter[s]
Used by:
Cause: The startup format was incorrect.
Remedy: Check the input command.
------------------------------
第 1861 页