FUJI错误代码查询.pdf - 第1996页

Code: 21009029 Display: Can't rewrite data check flag Used by: Cause: The data check flag could not be re-written. Remedy: Check that the file write protect setting is not on. ------------------------------ Code: 21…

100%1 / 5282
Cause: No sequence data exists.
Remedy: Correct the sequence data.
------------------------------
Code: 21009021
Display: Output error filename not specified
Used by:
Cause: The error output destination was not specified when a background task was started up.
Remedy: If the error occurred due to a direct command, input the command correctly.
------------------------------
Code: 21009022
Display: Compress filename not found
Used by:
Cause: Compressed file not specified.
Remedy: Specify a file.
------------------------------
Code: 21009023
Display: Compress file on disk not found
Used by:
Cause: The compressed file does not exist.
Remedy: Check the filename.
------------------------------
Code: 21009024
Display: check flag read error
Used by:
Cause: The check flag could not be read.
Remedy: Save and correct the file at the editor.
------------------------------
Code: 21009025
Display: check flag rewrite error
Used by:
Cause: The check flag could not be re-written.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21009026
Display: compress file info_data set error
Used by:
Cause: Information data could not be written to the compressed file.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21009027
Display: can't write expand data
Used by:
Cause: The expanded data could not be written.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21009028
Display: File Descriptor check data read error
Used by:
Cause: Data could not be read from the File Descriptor.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
第 1995 页
Code: 21009029
Display: Can't rewrite data check flag
Used by:
Cause: The data check flag could not be re-written.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 2100902A
Display: Can't calculate device quantity and Program_information data
Used by:
Cause: The number of devices used in the expanded data and the information data could not be set.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 2100902B
Display: Syntax error: illegal '-d' option
Used by:
Cause: An illegal "-d" option was specified at start-up.
Remedy: If the error occurred due to a direct command, input the command correctly.
------------------------------
Code: 2100902D
Display: Muti_block count read error
Used by:
Cause: The multi-block data in the program could not be read.
Remedy: Check that the data at the editor is not incorrect. Save and correct the file.
------------------------------
Code: 2100902E
Display: Expanded file copy error
Used by:
Cause: The original program could not be copied to an expander file.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 2100A001
Display: /pipe/transmit_controller open error
Used by:
Cause: The TC pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A002
Display: /pipe/transmit prcs open error
Used by:
Cause: The pipe from the TC to the transmit process could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A003
Display: qp_open pseudo pipe open error
Used by:
Cause: The queue pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A004
Display: /pipe/tci back open error
Used by:
第 1996 页
Cause: The production program data pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A005
Display: /pipe/mother open error
Used by:
Cause: The mother pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A006
Display: qp_read error
Used by:
Cause: The queue buffer could not be read.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A007
Display: q_pipe buff full
Used by:
Cause: The queue buffer is full.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A008
Display: qp_write error
Used by:
Cause: Data could not be written to the queue buffer.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A009
Display: q_pipe buff full
Used by:
Cause: The queue buffer is full.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A00A
Display: Command fork error
Used by:
Cause: The transmission process could not be started up.
Remedy: Re-boot MCS. If the error recurs, re-install the software.
------------------------------
Code: 2100A00B
Display: Pipe buff format error
Used by:
Cause: Incorrect transmission command format.
Remedy: Re-boot MCS.
------------------------------
Code: 2100A00C
Display: file oepn error
Used by:
Cause: Unable to open the Proper transmission and Status transmission nickname files.
Remedy: Proper and Status data is transmitted in the nickname files. Check the file services directory to
ensure that the files exist.
第 1997 页