FUJI错误代码查询.pdf - 第1372页
uneven. There is foreign matter stuck to the part. Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer Vision #6. Make sure foreign matter is not stuck to the parts. ------…
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0026
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0027
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0028
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0029
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D002A
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D002B
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
第 1371 页
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0030
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0031
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0032
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0033
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0034
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0035
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
第 1372 页
------------------------------
Code: 1D0D0036
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0037
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0038
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D0039
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D003A
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D0D8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0D8100
Display:
第 1373 页