FUJI错误代码查询.pdf - 第415页

Used by: QP242,QP201,QP202,QP203 Cause: Unit number E (COM78808) over-run error. Remedy: Turn off the machine power. ------------------------------ Code: 12031E14 Display: Used by: QP242,QP201,QP202,QP203 Cause: Unit num…

100%1 / 5282
------------------------------
Code: 12031D8B
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number D (VM 1440). Communication internal alarm.
Remedy: Either the CPU board or the VM 1440 board is defective. Contact Fuji.
------------------------------
Code: 12031E00
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (ACIA) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E01
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (ACIA) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E02
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (ACIA) reception buffer full.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E03
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (ACIA) no memory.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E10
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (COM78808) reception buffer full.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E11
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (COM78808) memory save error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E12
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (COM78808) framing error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E13
Display:
第 414 页
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (COM78808) over-run error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E14
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (COM78808) parity error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E20
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET) transmission error. The companion ID did not exist.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E21
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET) reception buffer overflow (the MCB data area size set at OS
was exceeded).
Remedy: Turn off the machine power.
------------------------------
Code: 12031E22
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Partitioning processing was prohibited, so data partitioning
could not be carried out.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E23
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET) buffer overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E24
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET) IP header check sum error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E25
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). IP header sub-heading is incorrect (the partitioned IP packet
sub-headings are not the same).
Remedy: Turn off the machine power.
------------------------------
Code: 12031E26
Display:
第 415 页
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Creation time was insufficient so the packet was discarded.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E27
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Time between placement of partitioned packets exceeded 15
seconds.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E28
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Incorrect original transmission internet address.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E29
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Incorrect internet address.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E2A
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Incorrect protocol number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E2B
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Received IP packet used an Internet address that does not
exist.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E2C
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). Received IP data used a non-existent port number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E30
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number E (UDP/IP/ARCNET). ICPM header includes incorrect information.
Remedy: Turn off the machine power.
------------------------------
Code: 12031E31
Display:
Used by: QP242,QP201,QP202,QP203
第 416 页