FUJI错误代码查询.pdf - 第494页
------------------------------ Code: 1205013? Display: Nozzle damage has been detected on head 2. Used by: NP133,NP134,NP153 Cause: The nozzle bend check sensor at head 2, 13ST has detected a nozzle error. The question m…
Code: 12050112
Display: Btm Cleaner Position Error
Used by: GP551
Cause: The lower cleaner tray is not in the locked position.
Remedy: Move the lower cleaner tray to the locked position.
------------------------------
Code: 12050113
Display: 印刷位置无网板
[Conf scr at print pos now]
Used by: GPX,NXTP
Cause: 印刷位置上没有网板。
Remedy: 请在印刷位置上设置网板。
<img src="$LKEY_ERRIMG_MC$/12050113.PNG">
------------------------------
Code: 12050114
Display: Warning! Top Cleaner may damage solder roll
Used by: GP551
Cause: On machines with double squeegees, solder may be present on the screen. During automatic
operation, cleaning of both sides cannot be performed.
Remedy: In Proper data, set the cleaning method to not use the upper cleaning unit.
------------------------------
Code: 12050115
Display: Placing head 1 nozzle has become detached.
Used by: IP3
Cause: The nozzle at placing head 1 has become detached.
Remedy: Remove the detached nozzle from within the machine. Either reattach the nozzle to the head by
hand, or set the nozzle in the nozzle change unit and use the [NOZZLE] -[CHANGE] commands to perform
reattachment.
------------------------------
Code: 12050116
Display: Placing head 2 nozzle has become detached.
Used by: IP3
Cause: The nozzle at placing head 2 has become detached.
Remedy: Remove the detached nozzle from within the machine. Either reattach the nozzle to the head by
hand, or set the nozzle in the nozzle change unit and use the [NOZZLE] -[CHANGE] commands to perform
reattachment.
------------------------------
Code: 12050117
Display: 传感器检测出挡块不可下降错误
Used by: NXTP
Cause: 因为传感器检测出电路板，所以不能降低挡块。
Remedy: 1.请清除电路板。
2.请调整传感器。
<img src="$LKEY_ERRIMG_MC$/12050117.PNG">
------------------------------
Code: 1205012?
Display: Nozzle damage has been detected on head 1.
Used by: NP133,NP134,NP153
Cause: The nozzle bend check sensor at head 1, 13ST has detected a nozzle error. The question mark (?)
indicates the nozzle position. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Replace the nozzle, either manually or using the nozzle change command.
第 493 页
------------------------------
Code: 1205013?
Display: Nozzle damage has been detected on head 2.
Used by: NP133,NP134,NP153
Cause: The nozzle bend check sensor at head 2, 13ST has detected a nozzle error. The question mark (?)
indicates the nozzle position. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Replace the nozzle, either manually or using the nozzle change command.
------------------------------
Code: 1205014?
Display: A nozzle error has been detected at head 1, 16ST.
Used by: NP133,NP134,NP153
Cause: The nozzle check sensor at head 1, 16ST has detected a nozzle position error. The question mark
(?) indicates the shaft. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Inspect the nozzle and shaft where the error occurred. The nozzle may be stuck.
------------------------------
Code: 1205015?
Display: A nozzle error has been detected at head 2, 16ST.
Used by: NP133,NP134,NP153
Cause: The nozzle check sensor at head 2, 16ST has detected a nozzle position error. The question mark
(?) indicates the shaft. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Inspect the nozzle and shaft where the error occurred. The nozzle may be stuck.
------------------------------
Code: 1205016?
Display: A nozzle catch error has been detected at head 1, 1ST.
Used by: NP133,NP134,NP153
Cause: The nozzle catch check sensor at head 1, 1ST has detected a nozzle catch error. The question
mark (?) indicates the shaft. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Inspect the nozzle and shaft where the error occurred. In some cases a nozzle catch error occurs
when the nozzle is stuck.
------------------------------
Code: 1205017?
Display: A nozzle catch error has been detected at head 2, 1ST.
Used by: NP133,NP134,NP153
Cause: The nozzle catch check sensor at head 2, 1ST has detected a nozzle catch error. The question
mark (?) indicates the shaft. If (?) is 0 then the error is on shaft A, if 1 then shaft B, if F then shaft P, etc.
Remedy: Inspect the nozzle and shaft where the error occurred. In some cases a nozzle catch error occurs
when the nozzle is stuck.
------------------------------
Code: 12050180
Display: A vacuum pump thermal error has been detected.
Used by: NP133,NP134,NP153
Cause: The vacuum pump power source breaker was switched.
Remedy: Inspect the vacuum pump motor, the 200V main power source, and their connections.
------------------------------
Code: 12050181
Display: Shutter 1 Alarm
Upper limit sensor error
Used by: CP4,CP42,CP43,CP6,CP6M,CP65,CP642,CP642M,CP643
Cause: An alarm has occurred at the upper-limit sensor for the shutter of the D1-axis.
Remedy: Check the upper-limit sensor for the shutter of the D1-axis.
------------------------------
第 494 页
Code: 12050182
Display: Shutter 1 Alarm
Lower limit sensor error
Used by: CP4,CP42,CP43,CP6,CP6M,CP65,CP642,CP642M,CP643
Cause: An alarm has occurred at the lower-limit sensor for the shutter of the D1-axis.
Remedy: Check the lower-limit sensor for the shutter of the D1-axis.
------------------------------
Code: 12050183
Display: Shutter 2 Alarm
Upper limit sensor error
Used by: CP4,CP42,CP43,CP6,CP6M,CP65,CP642,CP642M,CP643
Cause: An alarm has occurred at the upper-limit sensor for the shutter of the D2-axis.
Remedy: Check the upper-limit sensor for the shutter of the D2-axis.
------------------------------
Code: 12050184
Display: Shutter 2 Alarm
Lower limit sensor error
Used by: CP4,CP42,CP43,CP6,CP6M,CP65,CP642,CP642M,CP643
Cause: An alarm has occurred at the lower-limit sensor for the shutter of the D2-axis.
Remedy: Check the lower-limit sensor for the shutter of the D2-axis.
------------------------------
Code: 12050188
Display: D1-table stopper sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: The D1-table stopper UP sensor (X080) failed to switch on.
Remedy: Check the D1-table stopper UP sensor.
------------------------------
Code: 12050189
Display: D1-table stopper sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: The D1-table stopper DOWN sensor (X080) failed to switch off.
Remedy: Check the D1-table stopper DOWN sensor.
------------------------------
Code: 1205018A
Display: D1-table stopper sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: The D1-table stopper DOWN sensor (X080) failed to switch on.
Remedy: Check the D1-table stopper DOWN sensor.
------------------------------
Code: 1205018B
Display: D1-table stopper sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: The D1-table stopper UP sensor (X080) failed to switch off.
Remedy: Check the D1-table stopper UP sensor.
------------------------------
Code: 1205018C
Display: D1-table stopper sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: A logic error was detected at the D1-table stopper UP/DOWN sensors. The UP sensor (X080) and
the DOWN sensor (X081) are both on.
Remedy: Check the sensors.
第 495 页