FUJI错误代码查询.pdf - 第1955页
Used by: Cause: The coordinates in the sequence data are outside the board range. Remedy: Check that the correct values are input in XA, YA, Pcb_x and Pcb_y in the production program. Check that the correct values are in…
------------------------------
Code: 21007647
Display: Cam_table file seek error
Used by:
Cause: The seek function did not work on the system file.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007648
Display: Cam_table file path read error
Used by:
Cause: The input path could not be specified.
Remedy: Re-boot MCS. If the error recurs, re-install the software.
------------------------------
Code: 21007649
Display: Not get cycle time
Used by:
Cause: Management time could not be calculated.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764A
Display: Illegal format at Cam_table
Used by:
Cause: The cam table is not formatted correctly.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764B
Display: Pairing pattern file open error
Used by:
Cause: The system file could not be opened.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764C
Display: Pairing pattern file read error
Used by:
Cause: The system file could not be read.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764D
Display: Pairing pattern file file value different
Used by:
Cause: The contents of the system file are not normal.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 2100764E
Display: Not get queue position
Used by:
Cause: Memory could not be processed.
Remedy: Re-boot MCS.
------------------------------
Code: 2100764F
Display: Sequence data co-ordinates over range
第 1954 页
Used by:
Cause: The coordinates in the sequence data are outside the board range.
Remedy: Check that the correct values are input in XA, YA, Pcb_x and Pcb_y in the production program.
Check that the correct values are input in Pcb_org in the environment file. Pcb_org=x,y, board orientation
and change flag should be checked. The check flag could be either 0 or 1.
------------------------------
Code: 21007650
Display:
Used by:
Cause: The environment file could not be opened.
Remedy: Re-install the software.
------------------------------
Code: 21007651
Display:
Used by:
Cause: The environment file could not be read.
Remedy: Re-install the software.
------------------------------
Code: 21007652
Display: "Feeder position in PT file is out of range"
Used by:
Cause: A feeder position specified as fixed in the PST file is outside the feeder station range.
Remedy: Specify a feeder position within the feeder station's range.
------------------------------
Code: 21007653
Display: "There is insufficient space for a feeder in PT file"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred when the feeder width was checked against the end of the station.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21007654
Display: "Space between feeders in PT file is insufficient"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred due to interference between feeders.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21007700
Display: Illegal parameter option
Used by:
Cause: The start-up parameter is illegal.
Remedy: When doing direct start up, check and correct the input options.
------------------------------
Code: 21007701
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007702
第 1955 页
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007703
Display: File read error
Used by:
Cause: Unable to read the file.
Remedy: Check the filename. If it exists, use the Editor to check its contents. If there is a startup error
or if the contents of the file are damaged, rebuild the file.
------------------------------
Code: 21007704
Display: File seek error
Used by:
Cause: The seek file did not work on the production program file.
Remedy: Check the file, and correct and save it. If there is a startup error or if the contents of the file are
damaged, rebuild the file.
------------------------------
Code: 21007705
Display: Production file open error
Used by:
Cause: Unable to open the production file.
Remedy: Check the filename and check the contents of the file. If there is a startup error or if the
contents of the file are damaged, rebuild the file.
------------------------------
Code: 21007706
Display: Production file read error
Used by:
Cause: Unable to read the production file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007707
Display: Production file seek error
Used by:
Cause: The seek function does not work on the production program file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007708
Display: Input file open error
Used by:
Cause: Unable to open the input file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007709
Display: Output file open error
Used by:
Cause: Unable to open the output file.
第 1956 页