FUJI错误代码查询.pdf - 第675页

Used by: QP3,NP2 Cause: Servo amp error. Remedy: Reset the servo amp. ------------------------------ Code: 12068491 Display: TZ-axis: DB overload error! Used by: QP3,NP2 Cause: Servo amp error. Remedy: Reset the servo am…

100%1 / 5282
------------------------------
Code: 12068488
Display: TZ-axis: Motor/servo capacity mismatch.
Used by: QP3,NP2
Cause:
Remedy: Check that the motor and servo amplifier are connected correctly.
------------------------------
Code: 12068489
Display: TZ-axis: Overcurrent error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848A
Display: TZ-axis: Regeneration error!
Used by: QP3,NP2
Cause:
Remedy: Check that the regenerative resistance wiring is connected to the servo amplifier.
------------------------------
Code: 1206848B
Display: TZ-axis: Regeneration overload.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848C
Display: TZ-axis: Overvoltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848D
Display: TZ-axis: Insufficient voltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848E
Display: TZ-axis: Excess travel speed error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206848F
Display: TZ-axis: Overload peak error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068490
Display: TZ-axis: Structural overload error!
第 674 页
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068491
Display: TZ-axis: DB overload error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068492
Display: TZ-axis: Surge current limit resistor overload.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068493
Display: TZ-axis: Heat sink overheating error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068494
Display: TZ-axis: Absolute encoder backup error!
Used by: QP3,NP2
Cause:
Remedy: It is necessary to set up the absolute encoder.After the setup is complete, remeasure the
calibration data.
------------------------------
Code: 12068495
Display: TZ-axis: Absolute encoder checksum error!
Used by: QP3,NP2
Cause:
Remedy: It is necessary to set up the absolute encoder.After the setup is complete, remeasure the
calibration data.
------------------------------
Code: 12068496
Display: TZ-axis: Absolute encoder battery error!
Used by: QP3,NP2
Cause:
Remedy: With the servo amplifier power on, check the battery connection.
------------------------------
Code: 12068497
Display: TZ-axis: Absolute encoder data error!
Used by: QP3,NP2
Cause:
Remedy: Without removing the absolute encoder cable, check the cabling surrounding the encoder, and
fix if necessary.
------------------------------
Code: 12068498
Display: TZ-axis: Absolute encoder excess speed error!
第 675 页
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068499
Display: TZ-axis: Encoder overheating error!
Used by: QP3,NP2
Cause:
Remedy: The operating environment for the servo motor should be less than 40q-.
------------------------------
Code: 1206849A
Display: TZ-axis: Travel speed instruction A/D error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206849B
Display: TZ-axis: Torque command A/D error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206849C
Display: TZ-axis: Gate array (JL-0409) error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206849D
Display: TZ-axis: System error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206849E
Display: TZ-axis: Servo error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206849F
Display: TZ-axis: Fully closed loop phase A/B disconnected.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120684A0
Display: TZ-axis: Fully closed loop phase C disconnected.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
第 676 页