FUJI错误代码查询.pdf - 第1946页

------------------------------ Code: 21007605 Display: Input program file open error Used by: Cause: Unable to open the input file. Remedy: Check that the input file can be edited. If it cannot, recreate the file. ------…

100%1 / 5282
Code: 2100753B
Display: "There is insufficient space for a feeder in PT file"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred when the feeder width was checked against the end of the station.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 2100753C
Display: "Space between feeders in PT file is insufficient"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred due to interference between feeders.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 2100753D
Display: "Undefined cartridge name for device in PT file"
Used by:
Cause: The feeder type cannot be determined, because the feeder type has not been entered in the device
comment field of the PST file. The feeder type will be determined based on the Part data.
Remedy: Enter the feeder type in the relevant device comment field of the PST file.
------------------------------
Code: 21007600
Display: Illegal parameter option
Used by:
Cause: The start-up parameter is illegal.
Remedy: When doing direct start up, check and correct the input options.
------------------------------
Code: 21007601
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007602
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007603
Display: Part data offset data read error
Used by:
Cause: Unable to read the Part data.
Remedy: This is a Part data format error. Check the Part data file in the Editor, and if the format is
unusual, reconstruct the file. Save the changes.
------------------------------
Code: 21007604
Display: Input program file read error
Used by:
Cause: Unable to read the input program file.
Remedy: Check that the input file can be edited. If it cannot, recreate the file.
第 1945 页
------------------------------
Code: 21007605
Display: Input program file open error
Used by:
Cause: Unable to open the input file.
Remedy: Check that the input file can be edited. If it cannot, recreate the file.
------------------------------
Code: 21007606
Display: Output program file open error
Used by:
Cause: Unable to open the output file.
Remedy: If the file already exists, check that the write protect setting is not on. If the write protect setting
is on, cancel the File Services' Write protect function.
------------------------------
Code: 21007607
Display: Output program file write error
Used by:
Cause: Unable to write to the output file.
Remedy: If the output file exists, check that the write protect setting is not on. If it is, cancel this setting
at File Services' Write protect function.
------------------------------
Code: 21007608
Display: Base program file open error
Used by:
Cause: Unable to open the file.
Remedy: Check the file.
------------------------------
Code: 21007609
Display: Base program file read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check that the base program is the production program.
------------------------------
Code: 2100760A
Display: Base program file not found
Used by:
Cause: Base program file not found.
Remedy: Check the specified filename.
------------------------------
Code: 2100760B
Display: Base program file offset data read error
Used by:
Cause: Unable to read the file.
Remedy: Use the Editor to check that the base program is the production program.
------------------------------
Code: 2100760C
Display: PST file open error
Used by:
Cause: Unable to open the PST file.
Remedy: Check that the PST file can be edited. If it cannot, or if the data is incorrect, reconstruct the file.
------------------------------
第 1946 页
Code: 2100760D
Display: PST file read error
Used by:
Cause: Unable to read the PST file.
Remedy: Check that the PST file can be edited. If it cannot, or if the data is incorrect, reconstruct the file.
------------------------------
Code: 2100760E
Display: PST file not found
Used by:
Cause: PST file not found.
Remedy: Check the specified filename.
------------------------------
Code: 2100760F
Display: PST file offset data read error
Used by:
Cause: Unable to read the PST file.
Remedy: Check that the PST file can be edited. If it cannot, or if the data is incorrect, reconstruct the file.
------------------------------
Code: 21007610
Display: Part data file open error
Used by:
Cause: Unable to open Part data.
Remedy: Use the Editor to check Part data. If the file cannot be opened, or if the contents of the file are
incorrect, recreate the data. Save the file.
------------------------------
Code: 21007611
Display: Part data file read error
Used by:
Cause: Unable to read Part data.
Remedy: Use the Editor to check Part data. If the file cannot be opened, or if the contents of the file are
incorrect, recreate the data. Save the file.
------------------------------
Code: 21007612
Display: MTT file open error
Used by:
Cause: Unable to open MTT file.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007613
Display: MTT file read error
Used by:
Cause: Unable to read the MTT file.
Remedy: Check the machine type. If it is correct, re-install the Automatic Programming software.
------------------------------
Code: 21007614
Display: MTT file offset data read error
Used by:
Cause: Unable to read the MTT file.
Remedy: Re-install the Automatic Programming software.
------------------------------
Code: 21007615
第 1947 页