FUJI错误代码查询.pdf - 第1941页
Display: Queueing error Used by: Cause: Unable to queue data. Remedy: Re-boot MCS. ------------------------------ Code: 2100751B Display: PT file not found Used by: Cause: The PST file was not found. Remedy: Check the in…
Remedy: Check the file.
------------------------------
Code: 21007512
Display: Production file read err
Used by:
Cause: Unable to read the production file.
Remedy: Check the file.
------------------------------
Code: 21007513
Display: No entry Machine type
Used by:
Cause: No machine type has been entered.
Remedy: Check the file.
------------------------------
Code: 21007514
Display: Part data read error
Used by:
Cause: Unable to read Part data.
Remedy: Check the file.
------------------------------
Code: 21007515
Display: Cartridge name create err
Used by:
Cause: Unable to create feeder names.
Remedy: Check that the information in Part data's Package_and_appearance_data is entered correctly.
------------------------------
Code: 21007516
Display: Cartridge data read error
Used by:
Cause: Unable to read feeder data.
Remedy: Check the Part data file.
------------------------------
Code: 21007517
Display: No entry Tray type
Used by:
Cause: The tray type has not been specified.
Remedy: Check the Part data file.
------------------------------
Code: 21007518
Display: No entry Cartridge type
Used by:
Cause: The feeder type has not been specified.
Remedy: Check the Part data file.
------------------------------
Code: 21007519
Display: Dequeing error
Used by:
Cause: Unable to de-queue memory.
Remedy: Re-boot MCS.
------------------------------
Code: 2100751A
第 1940 页
Display: Queueing error
Used by:
Cause: Unable to queue data.
Remedy: Re-boot MCS.
------------------------------
Code: 2100751B
Display: PT file not found
Used by:
Cause: The PST file was not found.
Remedy: Check the input filename.
------------------------------
Code: 2100751C
Display: PTT file open error
Used by:
Cause: Unable to read the PST file.
Remedy: Check the file.
------------------------------
Code: 2100751D
Display: Offset table read error
Used by:
Cause: Unable to read the file.
Remedy: Check the file and save it.
------------------------------
Code: 2100751E
Display: PT file read error
Used by:
Cause: Unable to read Permanent Set Table file.
Remedy: Check the file and save the changes.
------------------------------
Code: 2100751F
Display: Output file not found
Used by:
Cause: The output file does not exist.
Remedy: Re-start the MCS.
------------------------------
Code: 21007520
Display: Output file open error
Used by:
Cause: Unable to open the output file.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21007521
Display: Production file write err
Used by:
Cause: Unable to write to the file.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21007522
Display: Index file not found
Used by:
Cause: The index file was not found.
第 1941 页
Remedy: If the machine type is correct, re-install the software.
------------------------------
Code: 21007523
Display: Index file open error
Used by:
Cause: Unable to open the index file.
Remedy: Re-install the software.
------------------------------
Code: 21007524
Display: Strategy file get error
Used by:
Cause: Unable to read the system (strategy) file.
Remedy: Re-install the software.
------------------------------
Code: 21007525
Display: Make not mark sequence
Used by:
Cause: A mark sequence was not created.
Remedy: This message occurs when there is a program without a mark sequence.
------------------------------
Code: 21007526
Display: Station over
Used by:
Cause: The device could not be placed on the station.
Remedy: Join the feeder. Alternately, stop using the PST and the base program.
------------------------------
Code: 21007527
Display: Occupancy error
Used by:
Cause: An attempt was made to place a fixed device where it could not be placed.
Remedy: Depending on the feeder width, there are cases where the feeders cannot be placed next to each
other. Change the location.
------------------------------
Code: 21007528
Display: Slot info read error
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 21007529
Display: Occupancy data not found
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 2100752A
Display: Part data open error
Used by:
Cause: Unable to open Part data.
Remedy: Check the file.
------------------------------
第 1942 页