FUJI错误代码查询.pdf - 第2141页

Cause: The Part data, referred to by a sequence slot that contains no skipped board/feeder/sequence setting, does not exist. Remedy: The program file is incorrect. Check and correct the file contents. -------------------…

Used by:

Cause: The tray dimensions are outside the permissible XP tray specifications (4.00mm - 25.40mm).

Remedy: Remedy: Input a permissible tray thickness (4.00mm - 25.40mm).

------------------------------

Code: 2300E5DB

Display: Set [Tray Length] to 95.00 mm or more when using the power remover.

Used by:

Cause: The power remover cannot be used to eject trays if the "Tray Length" setting is less than 95.00

mm.

(Only the standard remover can be used)

Remedy: When using the power remover, set "Tray Length" to 95.00 mm or more.

------------------------------

Code: 2300E5DC

Display: Set [Tray Width] to 95.00 mm or more when using the power remover.

Used by:

Cause: The power remover cannot be used to eject trays if the "Tray Width" setting is less than 95.00

mm.

(Only the standard remover can be used)

Remedy: When using the power remover, set "Tray Width" to 95.00 mm or more.

------------------------------

Code: 2300E5DD

Display: The current [Tray Dump Pick Position X] setting is incorrect when using the power remover.

Used by:

Cause: The power remover cannot be used to eject trays with the specified "Tray Dump Pick Position X"

setting.

(Only the standard remover can be used)

Remedy: When using the power remover, set "Tray Dump Pick Position X" so that the remover picks up

the tray at the correct position.

(Use the following formula to set the correct value.)

95 / 2 =< [Tray Dump Pick Position X] x (-1) =< [Tray Length] - (95 / 2)

------------------------------

Code: 2300E5DE

Display: The current [Tray Dump Pick Position Y] setting is incorrect when using the power remover.

Used by:

Cause: The power remover cannot be used to eject trays with the specified "Tray Dump Pick Position Y"

setting.

(Only the standard remover can be used)

Remedy: When using the power remover, set "Tray Dump Pick Position Y" so that the remover picks up

the tray at the correct position.

(Use the following formula to set the correct value.)

95 / 2 =< [Tray Dump Pick Position Y] =< [Tray Width] - (95 / 2)

------------------------------

Code: 23040005

Display: A feeder does not exist in the slot referred to in the sequence.

Used by:

Cause: A feeder does not exist in the slot referred to in the sequence.

Remedy: The program file is incorrect. Check and correct the file contents.

------------------------------

Code: 23040006

Display: Part data referred to by the sequence slot does not exist.

Used by:

第 2140 页

Cause: The Part data, referred to by a sequence slot that contains no skipped board/feeder/sequence

setting, does not exist.

Remedy: The program file is incorrect. Check and correct the file contents.

------------------------------

Code: 23040008

Display: No feeder exists in the slot referenced by this skipped sequence (for skipped sequences included

in optimization).

Used by:

Cause: A feeder does not exist in a sequence slot that contains board/feeder/sequence skip settings.

Remedy: The program file is incorrect. Check and correct the file contents.

------------------------------

Code: 2304000A

Display: Part data referred to by the skip sequence does not exist. This error can be avoided by selecting

[Lines to Skip are Removed] when you optimize.

Used by:

Cause: The part data referred to by a sequence slot containing board/feeder/sequence skip settings does

not exist.

Remedy: The program file is incorrect. Check and correct the file contents.

------------------------------

Code: 2304000D

Display: The Alt. Feeder does not exist. Do you want to set 0 for alternate feeder?

Used by:

Cause: A feeder is not set in the alternate feeder specified for the displayed stage-slot.

Remedy: The Feeder Setup information in the program file is incorrect. Check the settings.

------------------------------

Code: 2304000E

Display: There are too many feeders allocated to one stage.

Used by:

Cause: When automatic feeder arrangement was selected at the Optimize Condition settings screen, the

number of feeders allocated to the stage exceeded the maximum feeder slots.

Remedy: Firstly, try changing the [Use feeder type] settings. If unsuccessful, perform optimization using

the [Alt. Feeders are Removed] setting. If still unsuccessful, reduce the part varieties used in the program.

------------------------------

Code: 23040010

Display: Part data referred to by the unused feeders in the [Fix Feeder Slots] does not exist. (Even for

unused feeder(s) without part data, it can't be determined whether the feeder is set at the machine.) This

error can be avoided by selecting [Automatic Most Suitable Feeder Arrangement] when you optimize.

Used by:

Cause: There is no part data displayed in the Feeder Setup.

Remedy: The program file data is incorrect. Check the contents.

------------------------------

Code: 23040012

Display: The slot number does not exist at the machine. This error can be avoided by selecting [Automatic

Most Suitable Feeder Arrangement] when you optimize.

Used by:

Cause: The specified stage - slot number does not exist.

Remedy: Check the program file's stage number (PROGRAM/DEVICE+/GUTSTN) and slot number

(PROGRAM/DEVICE+/GUTSLTN), or alternatively use the [Automatic Most Suitable Feeder Arrangement]

setting for optimization.

------------------------------

Code: 23040015

第 2141 页

Display: A feeder included in fixed feeder processing cannot be loaded on the stage because it is too close

to the feeder to the left.

Used by:

Cause: In the program's feeder setup, a feeder wide enough to interfere with the adjacent feeder on the

left side.

Remedy: Check the program file's stage number (PROGRAM/DEVICE+/GUTSTN) and slot number

(PROGRAM/DEVICE+/GUTSLTN), or alternatively, use the [Automatic Most Suitable Feeder Arrangement]

setting for optimization.

------------------------------

Code: 2304001A

Display: Are you finished?

Used by:

Cause: The confirmation dialog displays at each time of completion.

Remedy: Select [Yes] to finish. Select [No] to continue.

------------------------------

Code: 2304001B

Display: The optimized program has not been saved yet. Will you save it?

Used by:

Cause: Attempting to open the program file, or optimization process has completed, but the optimized

program has not been saved to the file.

Remedy: Select [Yes] to display the dialog for saving the file with a new name.

When attempting to open the program file, select [No] to abandon the optimized program, and display the

dialog for selecting a new program file to be optimized.

When optimization process has completed, select [No] to exit without saving the optimized program.

------------------------------

Code: 2304001C

Display: No nozzle is registered.

Used by:

Cause: No valid nozzle match could be made between the Nozzle Config. file's NCFTYPE and the Nozzle

Spec. file's NSPNAME.

Remedy: There is a problem with either or both files. Normally, the Nozzle Config. and Nozzle Spec. files

in the MCS-X default directory are read automatically. Check that both files contain correct data. When

starting up the optimizer, in cases where prompted to specify a file because the default file cannot be

found, check the file contents and correct if necessary.

------------------------------

Code: 2304001D

Display: Nozzle Configuration File "Fujinzl.cfg" cannot be found. Specify a file?

Used by:

Cause: An attempt was made to read the Nozzle Config. File in the MCS-X default directory, but the file

could not be found. A file needs to be specified to continue.

Remedy: Select [Yes] to display the dialog for specifying a file. Select [Abort] to quit the optimizer.

------------------------------

Code: 2304001E

Display: The contents of Nozzle Configuration File are empty.

Used by:

Cause: The Nozzle Config. file is empty.

Remedy: There is a problem with the Nozzle Config. file. Normally, the Nozzle Config. file in the MCS-X

default directory is read automatically. Check that the file contains correct data. When starting up the

optimizer, in cases where prompted to specify a file because the default file cannot be found, check the file

contents and correct if necessary.

------------------------------

第 2142 页