FUJI错误代码查询.pdf - 第2041页
Code: 2100B228 Display: old format file exists Used by: Cause: A file with the previously used format exists. Remedy: Delete any file that uses the old format. ------------------------------ Code: 2100B229 Display: ls di…
Cause: Unable to create the log file.
Remedy: Re-execute the function.
------------------------------
Code: 2100B220
Display: file write error
Used by:
Cause: Unable to write to the index file.
Remedy: Re-execute the function.
------------------------------
Code: 2100B221
Display: floppy disk set user_disk
Used by:
Cause: The floppy disk has not been set.
Remedy: Set the floppy disk.
------------------------------
Code: 2100B222
Display: can't make EVAL directory
Used by:
Cause: Unable to create the EVAL directory.
Remedy: Check the capacity of the disk.
------------------------------
Code: 2100B223
Display: data output device not ready
Used by:
Cause: The data output device is not ready.
Remedy: Prepare the data output device.
------------------------------
Code: 2100B224
Display: Log file not found
Used by:
Cause: The specified log file does not exist.
Remedy: Check the filename.
------------------------------
Code: 2100B225
Display: log directory open error
Used by:
Cause: Unable to open the log directory.
Remedy: Check the directory.
------------------------------
Code: 2100B226
Display: sampling tmp file error
Used by:
Cause: Unable to open the sampling temporary file.
Remedy: Re-execute the function from the beginning.
------------------------------
Code: 2100B227
Display: file sort error
Used by:
Cause: The sampling file was incorrectly searched.
Remedy: Re-execute the function.
------------------------------
第 2040 页
Code: 2100B228
Display: old format file exists
Used by:
Cause: A file with the previously used format exists.
Remedy: Delete any file that uses the old format.
------------------------------
Code: 2100B229
Display: ls dir tmp file open error
Used by:
Cause: Unable to open the ls task temporary file.
Remedy: Re-execute the function.
------------------------------
Code: 2100B22A
Display: command error
Used by:
Cause: The command could not be executed.
Remedy: Check that the file partitions are in execution format. Check that the file exists. If it does not,
re-install the software.
------------------------------
Code: 2100B22B
Display: Loading error occurred - program may be destroyed!
Used by:
Cause: Too many commands are being executed in the program. The command cannot be executed.
Remedy: Re-execute the function. If the error recurs, wait for the other commands to finish. Then
execute the function.
------------------------------
Code: 2100B22C
Display: not enough memory !
Used by:
Cause: The command cannot execute because of a shortage of memory.
Remedy: Execute the command after other commands are finished.
------------------------------
Code: 2100B22D
Display: not found.
Used by:
Cause: The command does not exist.
Remedy: Check that the command was input correctly.
------------------------------
Code: 2100B22E
Display: not found search data in setting time
Used by:
Cause: The search data was not found within the specified time.
Remedy: Check for other data.
------------------------------
Code: 2100B300
Display:
Used by:
Cause: Unable to change the path.
Remedy: Re-execute the function. If the error recurs, reset the system.
------------------------------
Code: 2100B301
第 2041 页
Display:
Used by:
Cause: Unable to open the pipe.
Remedy: Re-execute the function. If the error recurs, reset the system.
------------------------------
Code: 2100B304
Display:
Used by:
Cause: Unable to open the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 2100B305
Display:
Used by:
Cause: Unable to link the event.
Remedy: Re-boot MCS.
------------------------------
Code: 2100B306
Display:
Used by:
Cause: Unable to read the line descriptor.
Remedy: Check that the line descriptor file is correct.
------------------------------
Code: 2100B307
Display:
Used by:
Cause: Unable to link the printer task.
Remedy: Re-boot MCS.
------------------------------
Code: 2100B308
Display:
Used by:
Cause: The stop event was not specified correctly.
Remedy: Re-execute the function. If the error recurs, reset the system.
------------------------------
Code: 2100B401
Display: Calc file read error
Used by:
Cause: Unable to read the calculation file.
Remedy: Create the file. Alternately, re-install the system.
------------------------------
Code: 2100B402
Display: change path error
Used by:
Cause: Unable to change the path.
Remedy: Re-execute the function. If the error recurs, reset the system.
------------------------------
Code: 2100B403
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
第 2042 页