FUJI错误代码查询.pdf - 第1900页
Used by: Cause: The separator's reason file could not be opened. Remedy: Check that the file exists, and check that the write protect setting is not on. ------------------------------ Code: 21006069 Display: reason …
------------------------------
Code: 21006060
Display: env command fork error
Used by:
Cause: The env command could not be started up.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 21006061
Display: help command fork error
Used by:
Cause: The HELP functions could not be booted.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 21006062
Display: separator pipe read error
Used by:
Cause: The Separator pipe could not be read.
Remedy: Re-execute the function.
------------------------------
Code: 21006063
Display: same device comment, but differing part names found
Used by:
Cause: Different part names were found with the same device comment.
Remedy: Correct the device comments in the Part Data.
------------------------------
Code: 21006064
Display: no eligible machines exist for separation
Used by:
Cause: The machine cannot be processed by the Separator.
Remedy: Correct the Line and/or Off-line Descriptor.
------------------------------
Code: 21006065
Display: No use device.
Used by:
Cause: Unused device.
Remedy: This is a warning message. Processing continues.
------------------------------
Code: 21006066
Display: exp command fork error
Used by:
Cause: The exp command could not be used.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 21006067
Display: exp command error exit
Used by:
Cause: The exp command was exited.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 21006068
Display: reason file open error
第 1899 页
Used by:
Cause: The separator's reason file could not be opened.
Remedy: Check that the file exists, and check that the write protect setting is not on.
------------------------------
Code: 21006069
Display: reason file print out error
Used by:
Cause: The separator's reason file could not be printed out.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 2100606A
Display: reason file read error
Used by:
Cause: The separator's reason file could not be read.
Remedy: Check that the file exists, and check that the write protect setting is not on.
------------------------------
Code: 2100606B
Display: parameter file open error
Used by:
Cause: The separator's parameter status file could not be opened.
Remedy: The file does not exist. Pull a new file from the editor.
------------------------------
Code: 2100606C
Display: illegal parameter file
Used by:
Cause: The separator's parameter status file is illegal.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 2100606D
Display: parameter file open error
Used by:
Cause: The separator's parameter status file could not be opened.
Remedy: The file does not exist. Pull a new file from the editor.
------------------------------
Code: 2100606E
Display: PT file not found <**.**.pt>
Used by:
Cause: Either a processing line in the permanent set table or an entire machine's PT file was not found.
Remedy: This is a warning message. Continue operation when questioned by the machine.
------------------------------
Code: 2100606F
Display: cartridge empty
Used by:
Cause: The feeder specified in the special conditions file was already used. Details are written to the
UN_sep file.
Remedy: Check the contents of the special condition file.
------------------------------
Code: 21006070
Display: no separation
Used by:
Cause: A condition which prohibits separation has been set in the special conditions file.
第 1900 页
Remedy: This is a warning. It is not an error message. Processing continues.
------------------------------
Code: 21006071
Display: file already exists
Used by:
Cause: The file to be created already exists.
Remedy: Check the file process.
------------------------------
Code: 21006072
Display: Illegal sub type (FIP1/FIP2)
Used by:
Cause: The machine sub-type name is illegal.
Remedy: Check the machine sub-type (specified line descriptor, Part data, etc.).
------------------------------
Code: 21006073
Display: GSP2 sequence file create error
Used by:
Cause: The GSP sequence file could not be created.
Remedy: Check the source program.
------------------------------
Code: 21006074
Display: GSP2 sequence file open error
Used by:
Cause: The GSP sequence file could not be opened.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that
there is enough memory remaining in the hard disk.
------------------------------
Code: 21006075
Display: GSP2 sequence file read error
Used by:
Cause: The GSP sequence file cannot be read.
Remedy: Delete the separator file and re-execute the function.
------------------------------
Code: 21006076
Display: GSP2 sequence file write error
Used by:
Cause: The GSP2 sequence file cannot be written to.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that the
hard disk has sufficient memory.
------------------------------
Code: 21006077
Display: special sequence ('F','M') are wanting in source file.
Used by:
Cause: The special sequence (F or M) is missing from the source program.
Remedy: Append the missing sequences to the source program.
------------------------------
Code: 21006078
Display: Special condition file not found
Used by:
Cause: The specified special condition file does not exist.
Remedy: Check the special condition file.
第 1901 页