FUJI错误代码查询.pdf - 第2112页
Used by: Cause: The specified filename does not exist. Remedy: Respecify the filename. ------------------------------ Code: 2100FE05 Display: change console path error Used by: Cause: During startup, the specified termin…
------------------------------
Code: 2100FA0F
Display: '+' option not found
Used by:
Cause: The '+' option was not found at start-up.
Remedy: Correct the input command if this error occurred due to a direct command.
------------------------------
Code: 2100FA10
Display: Proper for this M/C type is not supported
Used by:
Cause: The specified machine type is not supported.
Remedy: Specify the correct machine type.
------------------------------
Code: 2100FA11
Display: check flag read error
Used by:
Cause: The check flag data could not be read.
Remedy: Use the editor to check that the file is correct.
------------------------------
Code: 2100FA12
Display: Default value is used if no data is entered
Used by:
Cause: The program structure and descriptor structure are different.
Remedy: This is a warning. Correct and save the file using the editor.
------------------------------
Code: 2100FE00
Display: can't read strings file
Used by:
Cause: The string file (Ntchk_str.E) cannot be loaded into memory.
Remedy: Restart MCS or reinstall the system.
------------------------------
Code: 2100FE01
Display: not found '+' opition
Used by:
Cause: The '+' option was not found during startup.
Remedy: If this occurred during startup by direct command, check that the input command was correct.
------------------------------
Code: 2100FE02
Display: Syntax error - illegal '+' option
Used by:
Cause: The '+' option was not found during startup.
Remedy: If this occurred during startup by direct command, check that the input command was correct.
------------------------------
Code: 2100FE03
Display: Syntax error - not found check file
Used by:
Cause: The check object file has not been specified.
Remedy: Specify the filename.
------------------------------
Code: 2100FE04
Display: not found check file on disk
第 2111 页
Used by:
Cause: The specified filename does not exist.
Remedy: Respecify the filename.
------------------------------
Code: 2100FE05
Display: change console path error
Used by:
Cause: During startup, the specified terminal path could not switch to standard input/output.
Remedy: Reexecute the command. If it still does not work, restart MCS.
------------------------------
Code: 2100FE06
Display: CRT event link error
Used by:
Cause: The terminal event could not link.
Remedy: Reexecute the command. If it still does not work, restart MCS.
------------------------------
Code: 2100FE07
Display: can't load NAT file on memory
Used by:
Cause: The specified file could not be loaded into memory.
Remedy: Reexecute the command. If it still does not work, restart MCS.
------------------------------
Code: 2100FE08
Display: can't load file descriptor on memory
Used by:
Cause: The file descriptor cannot be loaded into memory.
Remedy: Reexecute the command. If it still does not work, restart MCS.
------------------------------
Code: 2100FE09
Display: This NAT M/C type is not supported
Used by:
Cause: The specified NAT machine type is not supported.
Remedy: Check the input machine type.
------------------------------
Code: 2100FE0A
Display: this check file is not a NAT
Used by:
Cause: The specified file is not a NAT file.
Remedy: Check that the file overwrite protect is not on.
------------------------------
Code: 2100FE0B
Display: check flag rewrite error
Used by:
Cause: Header data's header check flag could not be written.
Remedy: Check that the file overwrite protect is not on.
------------------------------
Code: 2100FE0C
Display: No.%d :data over range
Used by:
Cause: No. *** in the NAT file is out of range.
Remedy: Check and fix that item.
第 2112 页
------------------------------
Code: 2100FE0D
Display: all Nozzle_size and Back_light_size are zero
Used by:
Cause: Nozzle_size and Back_light_size settings are all 0.
Remedy: Check and fix those items.
------------------------------
Code: 2100FE0E
Display: Either Nozzle_size or Back_light_size is zero.
Used by:
Cause: Same as the code.
Remedy: Input data into "Nozzle_size" and "Back_light_size"
------------------------------
Code: 2100FE0F
Display: Set Nozzle_size smaller than Back_light_size.
Used by:
Cause: Same as the code
Remedy: Input a larger value into Back_light_size than Nozzle_size.
------------------------------
Code: 2100FE10
Display: Default value is used if no data is entered.
Used by:
Cause: The program structure and descriptor structure are different.
Remedy: This is a warning. Save and correct the file using the editor.
------------------------------
Code: 2100FF00
Display: can't read strings file
Used by:
Cause: The string file (stat_str.E) could not be loaded into memory.
Remedy: Re-boot MCS. If the error recurs, re-install the system.
------------------------------
Code: 2100FF01
Display: Syntax error - illegal '+' option
Used by:
Cause: The '+' option was used improperly at start-up.
Remedy: If this error was produced by a direct command, correct the command.
------------------------------
Code: 2100FF02
Display: Syntax error - illegal '-' option
Used by:
Cause: The '-' option was used improperly at start-up.
Remedy: If this error was produced by a direct command, correct the command.
------------------------------
Code: 2100FF03
Display: Syntax error - check file not found
Used by:
Cause: The name of the check file was not specified.
Remedy: Specify the filename.
------------------------------
Code: 2100FF04
Display: Check file not found on disk
第 2113 页