FUJI错误代码查询.pdf - 第2059页
Remedy: Reset MCS. ------------------------------ Code: 2100C221 Display: Module not found Used by: Cause: The specified process to be executed was not found. Remedy: Check thin MCS/2 was completely installed properly. U…
------------------------------
Code: 2100C212
Display: IRQ Vector is busy
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C213
Display: Non-Existing Segment
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C214
Display: File not accessible
Used by:
Cause: The Copy and Rewrite functions cannot run because the specified file is write protected.
Remedy: Select the write protect function and turn off the write production. Run the Copy function
again.
------------------------------
Code: 2100C215
Display: Invalid pathlist
Used by:
Cause: The method of specifying the pathlist is incorrect.
Remedy: Check the contents and partitions of the disk and file, and check the filename. Then, re-execute
the function.
------------------------------
Code: 2100C216
Display: File not found
Used by:
Cause: Either the specified file or the partition does not exist.
Remedy: Check the filename in the directory and input the filename again. If an error occurred while
performing a deletion, and the file exists in the file services file directory, execute the following command
from the UCI menu: ":/h0/cmds/del/ /h0/user/.bak/*".
------------------------------
Code: 2100C217
Display: File segment list is full
Used by:
Cause: The file is divided into too many segments and could not be written to.
Remedy: Delete unnecessary files, or perform maintenance on the hard disk.
------------------------------
Code: 2100C218
Display: File already exists
Used by:
Cause: A file with the same name as the specified file already exists.
Remedy: Change the specified filename or allow the previous file to be overwritten.
------------------------------
Code: 2100C219
Display: Illegal memory block specified.
Used by:
Cause: A system error occurred.
第 2058 页
Remedy: Reset MCS.
------------------------------
Code: 2100C221
Display: Module not found
Used by:
Cause: The specified process to be executed was not found.
Remedy: Check thin MCS/2 was completely installed properly. Use the program module test function for
the root of the problem.
------------------------------
Code: 2100C223
Display: Deleting stack memory
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C224
Display: Illegal process ID
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C225
Display: Bad IRQ parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C226
Display: No children
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C228
Display: The process has been aborted.
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C229
Display: Too many active processes
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C230
Display: Illegal Fork Parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2059 页
Code: 2100C231
Display: Known Module
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C232
Display: Bad module CRC
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check thin MCS/2 has been properly installed. Perform module tests to try and find the root of
the problem.
------------------------------
Code: 2100C234
Display: Non Existing Module
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C235
Display: Bad Name
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C236
Display: Bad module header parity
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C237
Display: No RAM Available
Used by:
Cause: RAM memory to use the file cannot be saved.
Remedy: Allocate more memory.
------------------------------
Code: 2100C238
Display: The directory is not empty
Used by:
Cause: The directory was not emptied completely after an attempt was made to empty it.
Remedy: Except in cases where this was attempted by direct command, contact Fuji.
------------------------------
Code: 2100C239
Display: No available task number
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2060 页