FUJI错误代码查询.pdf - 第1752页
Cause: The first lead on each side could not be found. Remedy: Check the lead width, the part supply direction, and the image acquisition conditions. ------------------------------ Code: 1D43400D Display: Same as code. U…
Cause: The machine failed to pick up a part. The nozzle being used is too large for the part. The part
cannot be identified in the vision processing image.
Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller
nozzle for the part. Reduce the CCD level so that the part image becomes visible.
------------------------------
Code: 1D434001
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434006
Display: Same as code.
Used by:
Cause: The part's inclination is excessive.
Remedy: Check the manner in which the part is picked up and the image acquisition conditions.
------------------------------
Code: 1D434007
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434008
Display: Same as code.
Used by:
Cause: The Part data does not indicate two or more leads on the upper and lower sides.
Remedy: Two or more leads per side are required for Vision #12. If the part does not have such leads,
select another appropriate vision number.
------------------------------
Code: 1D434009
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43400A
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43400B
Display: Same as code.
Used by:
Cause: The first lead on each side could not be found.
Remedy: Check the lead width, the part supply direction, and the image acquisition conditions.
------------------------------
Code: 1D43400C
Display: Same as code.
Used by:
第 1751 页
Cause: The first lead on each side could not be found.
Remedy: Check the lead width, the part supply direction, and the image acquisition conditions.
------------------------------
Code: 1D43400D
Display: Same as code.
Used by:
Cause: The lead pitch is too wide, or the leads are too wide.
Remedy: Check the part's shape.
------------------------------
Code: 1D43400E
Display: Same as code.
Used by:
Cause: An error occurred during missing lead processing.
Remedy: Check the lead pitch and the part supply direction.
------------------------------
Code: 1D43400F
Display: Same as code.
Used by:
Cause: The lead pitch has exceeded the allowable range.
Remedy: Check the part's shape.
------------------------------
Code: 1D434010
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434011
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434012
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434016
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D434019
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
第 1752 页
Code: 1D43401B
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D43401C
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D43401D
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43401F
Display: Same as code.
Used by:
Cause: Too many leads were found.
Remedy: Check the part's shape and supply direction.
------------------------------
Code: 1D434020
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434021
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D438002
Display: Same as code.
Used by:
Cause: The machine failed to pick up a part. The nozzle being used is to large for the part. The part
cannot be identified in the vision processing image.
Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller
nozzle for the part. Reduce the CCD level so that the part image becomes visible.
------------------------------
Code: 1D438100
Display: Same as code.
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. setting in the Part data.
------------------------------
Code: 1D438110
第 1753 页