FUJI错误代码查询.pdf - 第767页

The first ? in the error code represents the module number from 1 ? 16. 0, however, represents PMC 16. The second ? denotes the feeder position. 1: slot number 1 sub-slot number 0 or 1 2: slot number 1 sub-slot number 2 …

100%1 / 5282
Display: "Domain cannot be referenced"
"PM?? [******]"
"Err Code: 12073??6"
Used by: QP132
Cause: The feeder's LON chip domain table cannot be referenced.
(value replacing "??" is module number; command name appears in place of asterisks.)
(The first digit of "??" represents the module number; the second digit represents the slot position.)
1: slot number 1 sub-slot number 0 or 1
2: slot number 1 sub-slot number 2
3: slot number 2 sub-slot number 0 or 1
4: slot number 2 sub-slot number 2
5: slot number 3 sub-slot number 0 or 1
6: slot number 3 sub-slot number 2
7: slot number 4 sub-slot number 0 or 1
8: slot number 4 sub-slot number 2
9: slot number 5 sub-slot number 0 or 1
A: slot number 5 sub-slot number 2
B: slot number 6 sub-slot number 0 or 1
C: slot number 6 sub-slot number 2
Remedy: If the error still occurs after several association attempts, replace either the feeder or the feeder
PCB.
------------------------------
Code: 12073??7
Display: "Domain cannot be refreshed"
"PM?? [******]"
"Err Code: 12073??7"
Used by: QP132
Cause: The feeder's LON chip domain table cannot be refreshed.
(value replacing "??" is module number; command name appears in place of asterisks.)
(The first digit of "??" represents the module number; the second digit represents the slot position.)
1: slot number 1 sub-slot number 0 or 1
2: slot number 1 sub-slot number 2
3: slot number 2 sub-slot number 0 or 1
4: slot number 2 sub-slot number 2
5: slot number 3 sub-slot number 0 or 1
6: slot number 3 sub-slot number 2
7: slot number 4 sub-slot number 0 or 1
8: slot number 4 sub-slot number 2
9: slot number 5 sub-slot number 0 or 1
A: slot number 5 sub-slot number 2
B: slot number 6 sub-slot number 0 or 1
C: slot number 6 sub-slot number 2
Remedy: If the error persists after several association attempts, replace either the feeder or the feeder
PCB.
------------------------------
Code: 12073??8
Display: "No response from feeder."
"PM?? [******]"
"Err Code: 12073??8"
Used by: QP132
Cause: Feeder fails to respond to ON/OFF request within time limit.
第 766 页
The first ? in the error code represents the module number from 1 ? 16. 0, however, represents PMC 16.
The second ? denotes the feeder position.
1: slot number 1 sub-slot number 0 or 1
2: slot number 1 sub-slot number 2
3: slot number 2 sub-slot number 0 or 1
4: slot number 2 sub-slot number 2
5: slot number 3 sub-slot number 0 or 1
6: slot number 3 sub-slot number 2
7: slot number 4 sub-slot number 0 or 1
8: slot number 4 sub-slot number 2
9: slot number 5 sub-slot number 0 or 1
A: slot number 5 sub-slot number 2
B: slot number 6 sub-slot number 0 or 1
C: slot number 6 sub-slot number 2
?? in PM?? denotes the module number. ****** refers to the command name.
The first ? denotes the module number, where the second ? denotes the slot position.
Remedy: Ensure that the feeder is properly set in position.
------------------------------
Code: 12073??C
Display: The feeder status is BUSY.
PM?? [******]
Err Code: 12073??C
Used by: QP132
Cause: The operation could not be carried out. A feeding request had already been received or the
operator was feeding manually when another feeding request (SSEFED) was received at the feeder.
(The first "?" of the error code indicates the module number in hexadecimal notation. PMC 16 displays as
"0".)
(The second "?" of the error code indicates the feeder position.)
1: Subslot 0 or 1 of slot 1.
2: Subslot 2 of slot 1
3: Subslot 0 or 1 of slot 2
4: Subslot 2 of slot 2
5: Subslot 0 or 1 of slot 3
6: Subslot 2 of slot 3
7: Subslot 0 or 1 of slot 4
8: Subslot 2 of slot 4
9: Subslot 0 or 1 of slot 5
A: Subslot 2 of slot 5
B: Subslot 0 or 1 of slot 6
C: Subslot 2 of slot 6
("PM??" indicates the module number. "[******]" indicates the command.)
Remedy: Restart automatic operation. Replace the feeder if the problem is recurring.
------------------------------
Code: 12074?00
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Set Para1" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (parameter set 1).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 767 页
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?01
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Set Para2" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (parameter set 2)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?02
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Servo On/Off" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (servo power on/off).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?03
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;JOG Command" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (JOG command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?04
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Zero Setting" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (zero setting command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?05
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Positioning" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (positioning command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
第 768 页