FUJI错误代码查询.pdf - 第245页
Used by: NP2,QP3 Cause: Nozzle Proper data file could not be created. Save of nozzel Proper data has failed. Remedy: Inspect the hard disk. ------------------------------ Code: 11100B04 Display: Nozzle Proper data file a…
Code: 11100A02
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision of the camera definition file is too old. Cannot use the camera(s).
Remedy: Download or reinstall as correct camera definition file and restart the machine.
------------------------------
Code: 11100A03
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision of the camera definition file is too new. Cannot use the camera(s).
Remedy: Download or reinstall a correct camera definition file and restart the machine.
------------------------------
Code: 11100A04
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the camera definition file.
Remedy: Download or reinstall a correct camera definition file and restart the machine.
------------------------------
Code: 11100A05
Display: Out-of-range error!
Used by: NP2,QP3
Cause: The camera definition data items displayed in the parameter section are outside the prescribed
range. Cannot use the camera(s).
Remedy: Download or reinstall an uncorrupted camera definition file and restart the machine.
------------------------------
Code: 11100A06
Display: Insufficient data!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are missing from the camera definition file.
Remedy: Download or reinstall a correct camera definition file and restart the machine.
------------------------------
Code: 11100A07
Display: Camera definition file error
Used by: NP2,QP3
Cause: A camera definition file error occurred. Cameras cannot be used at this time.
Remedy: Re-install a normal camera definition file, then start up the machine.
------------------------------
Code: 11100B01
Display: File-open error!
Used by: NP2,QP3
Cause: Nozzle Proper data file could not be opened. Either file does not exist or it is damaged.
Remedy: Download correct nozzle proper data file or reinstall and then reboot machine.
------------------------------
Code: 11100B02
Display: File save error!
Used by: NP2,QP3
Cause: Nozzle Proper data file could not be written to hard disk. Save of nozzel Proper data has failed.
Remedy: Inspect the hard disk.
------------------------------
Code: 11100B03
Display: File creation error!
第 244 页
Used by: NP2,QP3
Cause: Nozzle Proper data file could not be created. Save of nozzel Proper data has failed.
Remedy: Inspect the hard disk.
------------------------------
Code: 11100B04
Display: Nozzle Proper data file alarm
Used by: NP2,QP3
Cause: Error in nozzle Proper data file.
Remedy: Reinstall correct nozzle Proper data file and reboot machine.
------------------------------
Code: 11100B05
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: Nozzle Proper data file could not be opened. Either file does not exist or it is damaged.
Remedy: Download or reinstall a correct nozzle proper data file and restart the machine.
------------------------------
Code: 11100C01
Display: File-open error!
Used by: NP2,QP3
Cause: Error in auto calibration data file.
Remedy: Download correct auto calibration data file and reboot machine.
------------------------------
Code: 11100C02
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the auto calibration data file.
Remedy: Download or reinstall a correct auto calibration data file and restart the machine.
------------------------------
Code: 11100D01
Display: File-open error!
Used by: NP2,QP3
Cause: Failed to open mark camera file. Cannot use the mark camera(s).
Remedy: Download or reinstall an uncorrupted mark camera file and restart the machine.
------------------------------
Code: 11100D02
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the mark camera file.
Remedy: Download or reinstall a correct mark camera file and restart the machine.
------------------------------
Code: 11100D03
Display: Mark camera file error
Used by: NP2,QP3
Cause: A mark camera file error occurred. Cameras cannot be used at this time.
Remedy: Re-install a normal mark camera file, then start up the machine.
------------------------------
Code: 11208003
Display: <XP*41>料带宽度在规格以外或者是 0。
(元件号码 = "*****")
<XP*42>Tape Width在规格之外。不能决定所使用的供料器。
Used by: XP241,XP341,XP142,XP242
第 245 页
Cause: <XP*41>Packaging Name不是E08xx, E12xx, E16xx, E24xx, E32xx, J32xx, E44xx, E56xx, E72xx,
E88xx、或者Tape Width不是8, 12, 16, 24, 32, 44, 56, 72, 88。
<XP*42>Tape Width在规格之外。不能决定所使用的供料器，因供料器宽度不明确而导致不能进行最优化处理
。
Remedy: <XP*41>请修正Tape Width或者Packaging Name。
<XP142>Packaging Type 在2:32mm Adhesive以外时，请将Tape Width设定为8，12，16，24，32中的
任意一个。
<XP242>Packaging Type在0:Tray，2:32mm Adhesive，4:Stick Feeder，9:Grooved Stick Feeder以外
时，请将Tape Width设定为8，12，16，24，32，44，56，72，88中的任意一个。
------------------------------
Code: 11208004
Display: 搬运速度为零。
(元件号码 = "********")
Used by: XP241
Cause: Part Transport Speed(PARTS/ENVDT/XP241ENVDT-/PENSPD1)是0。
Remedy: 程序文件的元件信息中所显示的号码的部分有问题。
请确认内容并改正。
------------------------------
Code: 11208005
Display: <XP*41>顺序在被参考的料站中没有供料器或者料盘。
(顺序No. = "***")
(平台No. = "***")
(料站No. = "***")
<XP*42>被指定的供料平台No./料站No.中没有设定元件数据。
Used by: XP241,XP142,XP242
Cause: <XP*41>子电路板板/供料器/顺序的任何一个跳过都没有被设定的顺序种类(Placing Sequence)的顺序中,
参考的料站的元件号码是空字符串。
<XP*42>在顺序数据上设定的供料平台No.和料站No中没有数据。
Remedy: <XP*41>程序文件有问题。请确认内容并改正。
<XP*42>在供料器安装上指定的供料平台No.／料站No.中设定数据，或指定已设定的供料平台No.／料站No.。
------------------------------
Code: 11208006
Display: <XP*41>在顺序的料站No.中没有找到参考的元件数据。
(顺序No. = "***")
(平台No. = "***")
(料站No. = "***")
(元件号码 = "*****")
<XP*42>未找到元件数据。
Used by: XP141,XP241,XP341,XP142,XP242
Cause: <XP*41>子电路板板/供料器/顺序的任何一个的跳过都没有被设定的顺序的料站No.中没有找到参考的元件
数据。
<XP*42>不存在对应于元件号码的数据。
Remedy: <XP*41>程序文件有问题。请确认内容并改正。
<XP*42>请创建指定的元件号码的数据或指定所存在的元件号码。
------------------------------
Code: 11208008
Display: 「包含跳过行的最优化」的时候, 跳过顺序的参考的料站中没有供料器或者料盘。
(顺序No. = "***")
(平台No. = "***")
(料站No. = "***")
Used by: XP241
第 246 页