FUJI错误代码查询.pdf - 第2222页

data file. Remedy: "FILESTRUCT" is a mandatory item. ------------------------------ Code: 51??1337 Display: "FILESTRUCT" is not entered in the B mark data file. Used by: Cause: "FILESTRUCT" …

100%1 / 5282
files, the B mark data is required in the applicable machine type and the above error is detected.
Remedy: Check the B mark data file which is referred to in the production program.
------------------------------
Code: 51??1330
Display: M mark file read error.
Used by:
Cause: An error occurred when reading the M mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the M mark data is required in the applicable machine type and the above error is detected.
Remedy: Check the M mark data file which is referred to in the production program.
------------------------------
Code: 51??1331
Display: G mark file read error.
Used by:
Cause: An error occurred when reading the G mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the G mark data is required in the applicable machine type and the above error is detected.
Remedy: Check the G mark data file which is referred to in the production program.
------------------------------
Code: 51??1332
Display: "FILETYPE" is not entered in the F mark data file.
Used by:
Cause: "FILETYPE" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified F mark
data file.
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??1333
Display: "FILETYPE" is not entered in the B mark data file.
Used by:
Cause: "FILETYPE" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified B mark
data file.
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??1334
Display: "FILETYPE" is not entered in the M mark data file.
Used by:
Cause: "FILETYPE" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified M mark
data file.
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??1335
Display: "FILETYPE" is not entered in the G mark data file.
Used by:
Cause: "FILETYPE" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified G mark
data file.
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??1336
Display: "FILESTRUCT" is not entered in the F mark data file.
Used by:
Cause: "FILESTRUCT" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified F mark
第 2221 页
data file.
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??1337
Display: "FILESTRUCT" is not entered in the B mark data file.
Used by:
Cause: "FILESTRUCT" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified B mark
data file.
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??1338
Display: "FILESTRUCT" is not entered in the M mark data file.
Used by:
Cause: "FILESTRUCT" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified M
mark data file.
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??1339
Display: "FILESTRUCT" is not entered in the G mark data file.
Used by:
Cause: "FILESTRUCT" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified G
mark data file.
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??1340
Display: No "UNIT", "MARK" in F mark data file or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: The F mark data file referred to in the specified production program was read and "UNIT",
"MARK" was not found or "UNIT", "MARK" does not follow the correct unit. This report is made when the
mark data and production program are in different files, the F mark data is required in the applicable
machine type and the above error is detected.
Remedy: Check the "UNIT", "MARK" setting in the F mark data file which is referred to in the production
program. Furthermore, check the setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1341
Display: No "UNIT", "MARK" in B mark data file or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: The B mark data file referred to in the specified production program was read and "UNIT",
"MARK" was not found or "UNIT", "MARK" does not follow the correct unit. This report is made when the
mark data and production program are in different files, the B mark data is required in the applicable
machine type and the above error is detected.
Remedy: Check the "UNIT", "MARK" setting in the B mark data file which is referred to in the production
program. Furthermore, check the setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1342
Display: No "UNIT", "MARK" in M mark data file or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: The M mark data file referred to in the specified production program was read and "UNIT",
"MARK" was not found or "UNIT", "MARK" does not follow the correct unit. This report is made when the
mark data and production program are in different files, the M mark data is required in the applicable
machine type and the above error is detected.
第 2222 页
Remedy: Check the "UNIT", "MARK" setting in the M mark data file which is referred to in the production
program. Furthermore, check the setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1343
Display: No "UNIT", "MARK" in G mark data file or "UNIT", "MARK" is not at the correct position.
Used by:
Cause: The G mark data file referred to in the specified production program was read and "UNIT",
"MARK" was not found or "UNIT", "MARK" does not follow the correct unit. This report is made when the
mark data and production program are in different files, the G mark data is required in the applicable
machine type and the above error is detected.
Remedy: Check the "UNIT", "MARK" setting in the G mark data file which is referred to in the production
program. Furthermore, check the setting for the "UNIT" line prior to "UNIT", "MARK".
------------------------------
Code: 51??1344
Display: No "UNIT", "MARK" - "BLOCK", "HEADER-" in F mark data file.
Used by:
Cause: The F mark data file referred to in the specified production program was read and "BLOCK",
"HEADER-" in "UNIT", "MARK" was not found. This report is made when the mark data and production
program are in different files, the F mark data is required in the applicable machine type and the above
error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "HEADER-" setting in the F mark data file which is
referred to in the production program.
------------------------------
Code: 51??1345
Display: No "UNIT", "MARK" - "BLOCK", "HEADER-" in B mark data file.
Used by:
Cause: The B mark data file referred to in the specified production program was read and "BLOCK",
"HEADER-" in "UNIT", "MARK" was not found. This report is made when the mark data and production
program are in different files, the B mark data is required in the applicable machine type and the above
error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "HEADER-" setting in the B mark data file which is
referred to in the production program.
------------------------------
Code: 51??1346
Display: No "UNIT", "MARK" - "BLOCK", "HEADER-" in M mark data file.
Used by:
Cause: The M mark data file referred to in the specified production program was read and "BLOCK",
"HEADER-" in "UNIT", "MARK" was not found. This report is made when the mark data and production
program are in different files, the M mark data is required in the applicable machine type and the above
error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "HEADER-" setting in the M mark data file which is
referred to in the production program.
------------------------------
Code: 51??1347
Display: No "UNIT", "MARK" - "BLOCK", "HEADER-" in G mark data file.
Used by:
Cause: The G mark data file referred to in the specified production program was read and "BLOCK",
"HEADER-" in "UNIT", "MARK" was not found. This report is made when the mark data and production
program are in different files, the G mark data is required in the applicable machine type and the above
error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "HEADER-" setting in the G mark data file which is
第 2223 页