FUJI错误代码查询.pdf - 第1926页
Remedy: Re-install the software. ------------------------------ Code: 21007107 Display: Memory alocation error Used by: Cause: The memory was not allocated correctly. Remedy: Re-boot MCS. ------------------------------ C…
Display: Permanent Set Table name is too long
Used by:
Cause: The PST filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007021
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007100
Display: Illegal parameter option
Used by:
Cause: A specified parameter is illegal.
Remedy: When doing a direct startup, check the input option.
------------------------------
Code: 21007101
Display: Illegal parameter
Used by:
Cause: A parameter is illegal.
Remedy: When doing a direct startup, check the input option.
------------------------------
Code: 21007102
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007103
Display: Read pipe create error
Used by:
Cause: Unable to create the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007104
Display: Write pipe create error
Used by:
Cause: Unable to create the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007105
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007106
Display: MTT file get error
Used by:
Cause: Unable to read MTT file.
第 1925 页
Remedy: Re-install the software.
------------------------------
Code: 21007107
Display: Memory alocation error
Used by:
Cause: The memory was not allocated correctly.
Remedy: Re-boot MCS.
------------------------------
Code: 21007108
Display: Production file read err
Used by:
Cause: Unable to read production program.
Remedy: Check the file.
------------------------------
Code: 21007109
Display: Dequeing error
Used by:
Cause: Memory cannot be de-queued.
Remedy: Re-boot MCS.
------------------------------
Code: 2100710A
Display: Queueing error
Used by:
Cause: Unable to queue memory.
Remedy: Re-boot MCS.
------------------------------
Code: 2100710B
Display: Production file write err
Used by:
Cause: Unable to write to the production program file.
Remedy: Check that the write protect function is not on.
------------------------------
Code: 2100710C
Display: Memory is full
Used by:
Cause: Memory is full.
Remedy: Re-boot MCS.
------------------------------
Code: 2100710E
Display: Index file not found
Used by:
Cause: Unable to find index file.
Remedy: Re-install the software.
------------------------------
Code: 2100710F
Display: Index file open error
Used by:
Cause: Unable to open index file.
Remedy: Re-install the software.
------------------------------
Code: 21007110
第 1926 页
Display: Strategy file get error
Used by:
Cause: Unable to read the strategy file.
Remedy: Re-install the software.
------------------------------
Code: 21007111
Display: Make not mark sequence
Used by:
Cause: Mark sequences were not created.
Remedy: This message occurs when there are no command sequences in the program.
------------------------------
Code: 21007112
Display: Prod file not write
Used by:
Cause: Nothing was written to the output file.
Remedy: Check that the write protect function is not on.
------------------------------
Code: 21007113
Display: Source file not found
Used by:
Cause: Unable to find source file.
Remedy: Check the filename.
------------------------------
Code: 21007114
Display: Source file open error
Used by:
Cause: Unable to open the source file.
Remedy: Check the file.
------------------------------
Code: 21007115
Display: Output file open error
Used by:
Cause: Unable to open the output file.
Remedy: If the output filename exists previously, check the condition of the file.
------------------------------
Code: 21007116
Display: Environment file not found
Used by:
Cause: The GL environment file was not found.
Remedy: Create the file, or re-install the software.
------------------------------
Code: 21007117
Display: Environment file open err
Used by:
Cause: Unable to open the GL environment file.
Remedy: Check the file.
------------------------------
Code: 21007118
Display: Environment file read err
Used by:
Cause: Unable to read the GL environment file.
第 1927 页