FUJI错误代码查询.pdf - 第2093页
Used by: Cause: The input file could not be opened. Remedy: Check the file. ------------------------------ Code: 2100ED53 Display: Used by: Cause: A translated file with the same name already exists. Remedy: Set the over…
------------------------------
Code: 2100ED22
Display:
Used by:
Cause: The output filename must be specified in the directory.
Remedy: Correct the output filename.
------------------------------
Code: 2100ED23
Display:
Used by:
Cause: The Part data display file could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED24
Display:
Used by:
Cause: The Part data display file could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED25
Display:
Used by:
Cause: The Part data display file could not read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED26
Display:
Used by:
Cause: The part sort table (/D0/DATA/part) could not be found.
Remedy: Check the file.
------------------------------
Code: 2100ED27
Display:
Used by:
Cause: The part sort table (/D0/DATA/part) could not copy.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED50
Display:
Used by:
Cause: The start-up parameters are incorrect.
Remedy: Correct the input command if this error occurred due to a direct command.
------------------------------
Code: 2100ED51
Display:
Used by:
Cause: The MCS/1 input file does not exist.
Remedy: The Translator cannot run as the Part data object file does not exist.
------------------------------
Code: 2100ED52
Display:
第 2092 页
Used by:
Cause: The input file could not be opened.
Remedy: Check the file.
------------------------------
Code: 2100ED53
Display:
Used by:
Cause: A translated file with the same name already exists.
Remedy: Set the overwrite protect to YES to replace the contents of the existing file, or specify a new file
name.
------------------------------
Code: 2100ED54
Display:
Used by:
Cause: The output file could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED55
Display:
Used by:
Cause: The input file could not be read.
Remedy: Check the file.
------------------------------
Code: 2100ED56
Display:
Used by:
Cause: Data could not be written to the output file.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED57
Display:
Used by:
Cause: Over 255 mark data items resulted after the translation was complete.
Remedy: Correct the appropriate part of the data with the Editor.
------------------------------
Code: 2100ED58
Display:
Used by:
Cause: The Expander could not be started up.
Remedy: Check the contents of the file and try again. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED59
Display:
Used by:
Cause: Multi-block data could not be expanded.
Remedy: Change the multi-block data.
------------------------------
Code: 2100ED5A
Display:
Used by:
Cause: The floppy disk drive could not operate.
第 2093 页
Remedy: Make sure that the floppy disk drive lock lever is fully closed.
------------------------------
Code: 2100ED5B
Display:
Used by:
Cause: A module does not exist.
Remedy: Re-install the software.
------------------------------
Code: 2100EDA0
Display:
Used by:
Cause: The temporary directory for translation could not be deleted.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EDA1
Display:
Used by:
Cause: The temporary directory for translation could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100EDA2
Display:
Used by:
Cause: The display language could not be set.
Remedy: Correct the environment variable file.
------------------------------
Code: 2100EDA3
Display:
Used by:
Cause: The string file could not be loaded.
Remedy: Install the software and fix the problem.
------------------------------
Code: 2100EDA4
Display:
Used by:
Cause: The help function is not available. This is a warning message only.
Remedy: This is not an error. This is a warning.
------------------------------
Code: 2100EDA5
Display:
Used by:
Cause: The error display function is not available. This is a warning message only.
Remedy: This is not an error. This is a warning.
------------------------------
Code: 2100EDA6
Display:
Used by:
Cause: The print function is not available. This is a warning message only.
Remedy: This is not an error. This is a warning.
------------------------------
Code: 2100EDA7
第 2094 页