FUJI错误代码查询.pdf - 第296页
was received. Remedy: If this happens frequently in automatic operation, contact Fuji. ------------------------------ Code: 12020501 Display: Used by: Cause: The stocker is in operation mode, so the command cannot be exe…
Used by:
Cause: The stocker is not set so the screen cannot be supplied or received.
Remedy: Set the stocker.
------------------------------
Code: 12020417
Display:
Used by:
Cause: There is a screen in the receiving position so screens cannot be received.
Remedy: Make a space in the stocker so that screens can be received.
------------------------------
Code: 12020420
Display:
Used by:
Cause: The barcode cannot be read.
Remedy: Check the condition of the barcode on the screen.
------------------------------
Code: 12020421
Display:
Used by:
Cause: This error code was caused by the barcode reader.
Remedy: Consult the barcode reader operation manual.
------------------------------
Code: 12020422
Display:
Used by:
Cause: An unknown command was sent to the stocker.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji.
------------------------------
Code: 12020423
Display:
Used by:
Cause: The stocker is in local mode.
Remedy: Put the stocker into online mode.
------------------------------
Code: 12020424
Display:
Used by:
Cause: This error code was caused by the servo amp.
Remedy: Check the stocker elevator servo amp.
------------------------------
Code: 12020425
Display:
Used by:
Cause: The elevator axis has not been zero-set.
Remedy: If the stocker has been started, zero-set it.
------------------------------
Code: 12020426
Display:
Used by:
Cause: If the stocker is at #1, the descend command was received. If it was at #10, the ascend command
第 295 页
was received.
Remedy: If this happens frequently in automatic operation, contact Fuji.
------------------------------
Code: 12020501
Display:
Used by:
Cause: The stocker is in operation mode, so the command cannot be executed.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the command against the machine mode.
------------------------------
Code: 12020502
Display:
Used by:
Cause: The stocker is in monitor mode, so the command cannot be executed.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the command against the machine mode.
------------------------------
Code: 12020503
Display:
Used by:
Cause: The stocker or the user program is in P-ROM mode so the program cannot be transmitted.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check that the memory unit's RAM or EEP-ROM unit is not in overwrite protect mode.
------------------------------
Code: 12020504
Display:
Used by:
Cause: Address over/The user program has exceeded the values for all areas. If this problem occurs
frequently, check the stocker ROM version and the machine version, and contact Fuji. Check the program
again.
Remedy:
------------------------------
Code: 1202050B
Display:
Used by:
Cause: The stocker is in program mode, so the command cannot be executed.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. This code is not currently in use.
------------------------------
Code: 1202050C
Display:
Used by:
Cause: The stocker is in debug mode, so the command cannot be executed.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the command against the machine mode.
------------------------------
Code: 12020510
Display:
Used by:
Cause: A parity error occurred while the upper system link was receiving a command.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
第 296 页
contact Fuji. It is probably related to nozzles or something like that. Re-execute the command.
------------------------------
Code: 12020511
Display:
Used by:
Cause: Framing error. The stop bit could not be found while the upper system link was receiving a
command.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. It is probably related to nozzles or something like that. Re-execute the command.
------------------------------
Code: 12020512
Display:
Used by:
Cause: Overrun error. Another command was received while the upper system link was processing the
current command. If this problem occurs frequently, check the stocker ROM version and the machine
version, and contact Fuji. Lower the baud rate and retransmit the command.
Remedy:
------------------------------
Code: 12020513
Display:
Used by:
Cause: FCS error. The FCS made a calculation mistake or the error was related to the nozzles, etc.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the FCS calculation method. If the error was caused by noise, retransmit it.
------------------------------
Code: 12020514
Display:
Used by:
Cause: The command format was incorrect.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the format and retransmit.
------------------------------
Code: 12020515
Display:
Used by:
Cause: The READ/WRITE areas are incorrectly set.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check that the areas are correct and retransmit.
------------------------------
Code: 12020516
Display:
Used by:
Cause: The relevant step command was not there at the relevant step.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the step and the command.
------------------------------
Code: 12020519
Display:
Used by:
Cause: Alarm cannot be cancelled, memory error, EEP-ROM overwrite impossible, I/O command could
not be performed.
第 297 页