FUJI错误代码查询.pdf - 第696页

------------------------------ Code: 12068CB1 Display: MPRORG <axis> data error! Used by: QP3,NP2 Cause: Remedy: Check if the <axis> for the MPRORG command falls outside the 0-2 range. -----------------------…

100%1 / 5282
Used by: QP3,NP2
Cause:
Remedy: Check if the <sub-slot number> for the MPRXY4 command falls outside the 1-2 range.
------------------------------
Code: 12068C8F
Display: MPRXY4 <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRXY4 command falls outside the 0-1 range.
------------------------------
Code: 12068C90
Display: MPRXY5 <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRXY5 command falls outside the 0-2 range.
------------------------------
Code: 12068C91
Display: MPRXY5 <slot number> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <slot number> for the MPRXY5 command falls outside the 41-50 range.
------------------------------
Code: 12068C92
Display: MPRXY5 <sub-slot number> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <sub-slot number> for the MPRXY5 command falls outside the 1-2 range.
------------------------------
Code: 12068C93
Display: MPRXY5 <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRXY5 command falls outside the 0-1 range.
------------------------------
Code: 12068CA0
Display: MPRZ <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRZ command falls outside the 0-1 range.
------------------------------
Code: 12068CA1
Display: MPRZ <sub-slot number> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <sub-slot number> for the MPRZ command falls outside the 1-2 range.
------------------------------
Code: 12068CB0
Display: MPRORG <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRORG command falls outside the 0-2 range.
第 695 页
------------------------------
Code: 12068CB1
Display: MPRORG <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRORG command falls outside the 0-2 range.
------------------------------
Code: 12068CC0
Display: MPRRMV <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRRMV command falls outside the 0-2 range.
------------------------------
Code: 12068CC1
Display: MPRRMV <data> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <data instruction> for the MPRRMV command falls outside the 0-3 range.
------------------------------
Code: 12068CD0
Display: MPRFEE <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRFEE command falls outside the 0-1 range.
------------------------------
Code: 12068CD1
Display: MPRFEE <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRFEE command falls outside the 0-2 range.
------------------------------
Code: 12068CE0
Display: MPRCNV <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRCNV command falls outside the 0-1 range.
------------------------------
Code: 12068CE1
Display: MPRCNV <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRCNV command falls outside the 0-2 range.
------------------------------
Code: 12068CF0
Display: MPRSRV <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MPRSRV command falls outside the 0-1 range.
------------------------------
Code: 12068CF1
Display: MPRSRV <axis> data error!
第 696 页
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MPRSRV command falls outside the 0-1 range.
------------------------------
Code: 12068CF2
Display: MPRSRV <limit> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <limit> for the MPRSRV command falls outside the 0-1 range.
------------------------------
Code: 12068D00
Display: MINCSP <input method> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input method> for the MINCSP command falls outside the 0-1 range.
------------------------------
Code: 12068D01
Display: MINCSP <axis> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <axis> for the MINCSP command falls outside the 0-1 range.
------------------------------
Code: 12068D02
Display: MINCSP <input data> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <input data> for the MINCSP command falls outside the 1-100 range.
------------------------------
Code: 12068D20
Display: MINTER <mode> data error!
Used by: QP3,NP2
Cause:
Remedy: Check if the <mode> for the MINTER command falls outside the 0-1 range.
------------------------------
Code: 12069001
Display: 没有进行周期自动补正的必要的吸嘴。(Diameter:***, Type:Standard)
Used by: XP142,XP242
Cause: 因为没有安装进行周期自动补正的必要的吸嘴，所以不能开始生产。
必须有Diameter:***，Type:Standard 的吸嘴。
Remedy: 请安装Diameter:***，Type:Standard 的吸嘴。
------------------------------
Code: 12069002
Display: 闪光灯亮度出错
Used by: XP142,XP242
Cause: 闪光灯的发光亮度的降低超过补正容许量。
Remedy: 请清扫闪光灯。没有改善时请更换闪光灯。
------------------------------
Code: 12069003
Display: 相机增益变化量超过公差范围。
Used by: XP142,XP242
Cause: 在自动调光中被测定的元件相机增益值的变化量过大。
第 697 页