FUJI错误代码查询.pdf - 第1384页

------------------------------ Code: 1D0E0021 Display: Used by: Cause: The corner lead cannot be found. Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used. --------------…

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0016

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0017

Display:

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0018

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0019

Display:

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001A

Display:

Used by:

Cause: The part shape is not what was expected. Vision processing cannot take a good image.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001B

Display:

Used by:

Cause: There are too many leads (set in PDG).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001C

Display:

Used by:

Cause: There are too many leads (set in PDG).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0020

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

第 1383 页

------------------------------

Code: 1D0E0021

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0022

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0023

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0024

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0025

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0026

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0027

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0041

Display:

Used by:

Cause: The lead cannot be found. The pitch was too wide or there were not enough leads.

Remedy: Check that the nozzle is not dirty, that foreign matter is not stuck to the part and that the

correct part was picked.

------------------------------

Code: 1D0E0060

第 1384 页

Display:

Used by:

Cause: The corner lead is bent.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E3400

Display:

Used by:

Cause: The part is too short in the X direction.

Remedy: Check the part size, and check the image taken by vision processing.

------------------------------

Code: 1D0E4400

Display:

Used by:

Cause: The part is too long in the X direction.

Remedy: Check the part size, and check the image taken by vision processing.

------------------------------

Code: 1D0E8002

Display:

Used by:

Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not

detect any part.

Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower

the CCD level so that parts can be detected.

------------------------------

Code: 1D0E8100

Display:

Used by:

Cause: This Computer Vision No. is not supported.

Remedy: Check the Computer Vision No. in Part Data.

------------------------------

Code: 1D0E8110

Display:

Used by:

Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.

Remedy: Specify Lead_pitch in Part data.

------------------------------

Code: 1D0E8111

Display:

Used by:

Cause: Lead_width in Part data has not been specified.

Remedy: Specify Lead_width in Part data.

------------------------------

Code: 1D0E8112

Display:

Used by:

Cause: Lead_length_x in Part data has not been specified.

Remedy: Specify Lead_length_x in Part data.

------------------------------

Code: 1D0E8113

Display:

第 1385 页