FUJI错误代码查询.pdf - 第451页
Code: 12035E0A Display: Used by: IP3 Cause: Axis number 14 encoder error. Remedy: Turn off the machine power. ------------------------------ Code: 12035E0B Display: Used by: Cause: Axis number 14 synchronicity error. Rem…
Cause: Axis number 14 system error.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E02
Display:
Used by: IP3
Cause: Axis number 14 incorrect command.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E03
Display:
Used by: IP3
Cause: Axis number 14 placement time too long.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E04
Display:
Used by: IP3
Cause: Axis number 14 deviation overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E05
Display:
Used by: IP3
Cause: Axis number 14 + soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E06
Display:
Used by:
Cause: Axis number 14 - soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E07
Display:
Used by: IP3
Cause: Axis number 14 not ready.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E08
Display:
Used by:
Cause: Axis number 14 emergency stop.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E09
Display:
Used by: IP3
Cause: Incorrect parameter was sent from axis number 14.
Remedy: Turn off the machine power.
------------------------------
第 450 页
Code: 12035E0A
Display:
Used by: IP3
Cause: Axis number 14 encoder error.
Remedy: Turn off the machine power.
------------------------------
Code: 12035E0B
Display:
Used by:
Cause: Axis number 14 synchronicity error.
Remedy: Cut the machine power.
------------------------------
Code: 12035E0C
Display:
Used by:
Cause: The servo interlock was activated during startup.
Remedy: Check the interlock sensor.
------------------------------
Code: 12035F01
Display:
Used by: IP3
Cause: Axis number 15 system error.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F02
Display:
Used by: IP3
Cause: Axis number 15 incorrect command.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F03
Display:
Used by: IP3
Cause: Axis number 15 placement time too long.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F04
Display:
Used by: IP3
Cause: Axis number 15 deviation overflow.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F05
Display:
Used by: IP3
Cause: Axis number 15 + soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F06
Display:
Used by:
第 451 页
Cause: Axis number 15 - soft limit.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F07
Display:
Used by: IP3
Cause: Axis number 15 not ready.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F08
Display:
Used by:
Cause: Axis number 15 emergency stop.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F09
Display:
Used by: IP3
Cause: Incorrect parameter was sent from axis number 15.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F0A
Display:
Used by: IP3
Cause: Axis number 15 encoder error.
Remedy: Turn off the machine power.
------------------------------
Code: 12035F0B
Display:
Used by:
Cause: Axis number 15 synchronicity error.
Remedy: Cut the machine power.
------------------------------
Code: 12035F0C
Display:
Used by:
Cause: The servo interlock was activated during startup.
Remedy: Check the interlock sensor.
------------------------------
Code: 12036001
Display:
Used by: IP1,IP2,IP3
Cause: This is a command sequence error. An L3 command could not be executed.
Remedy: The cause is probably a bug in the FIP-II firmware. Cut the power and restart the operation
from the beginning. If serial communication can be downloaded from the LLL board, the LLL error
conditions can be checked. Set the LLL board so that serial communication can be performed. If the LLL
board's dip switch S4's 1 is set to ON, debug information can be output. Connect the LLL board and a
terminal (personal computer, etc.) via an RS232C or RS-422 cable. The terminal settings must match the
LLL board settings. In this way, if the LLL operates, one can check where the error originated.
------------------------------
Code: 12036002
第 452 页